Ranger Windshield Banner Decal - Cast Vinyl Truck Sticker

Description

A matte or gloss Cast Vinyl windshield banner decal sized for truck owners who want a clean, custom top-of-glass look. Cut to order in 4, 8, 12 or 18 inch heights.

A Windshield Banner That Fits Your Ranger Build

This banner decal is designed for drivers building out their Ranger with a coordinated look, whether that means pairing it with a full ford bronco decal kit style theme or keeping things simple with one strong statement across the top of the glass. The decal arrives as a single pre-masked piece, so you get a continuous banner without seams or breaks. Choose the height that matches your vision: a 4 inch strip for a subtle accent, an 8 inch cut for a balanced band, or 12 and 18 inch options when you want the banner to dominate the view from the outside. Every decal is cut after you order, so what arrives matches the size you picked at checkout.

Choose Your Finish: Matte, Gloss, Clear or Static Cling

Pick the surface that matches the rest of your build. Matte gives a flat, printed-on look that blends into tinted glass and hides glare on bright days. Gloss adds depth and shine that stands out against a clean windshield. Clear vinyl works well when you want lettering or a design without a solid background, letting the glass show through. Static cling is the no-adhesive option for drivers who want a banner they can reposition or remove in seconds, which is handy for shows, meets or seasonal changes. All four options are cut from quality cast or calendered vinyl depending on the finish selected, and each is made to be trimmed and applied with basic tools.

Application Tips for a Bubble-Free Banner

Start with a clean, dry windshield free of wax, dust and streaks, ideally working in moderate temperatures away from direct sun. Lay the banner flat and use a squeegee or firm card to press the decal down from the center outward, working air toward the edges. The pre-mask layer keeps everything aligned during installation, and it peels away once the banner is fully adhered. For larger heights like the 12 and 18 inch cuts, a second set of hands makes alignment easier. Take your time on the first press-down, since working slowly from the middle out is the simplest way to avoid trapped air and edge lift.

Removal, Care and Pairing With Other Decals

When it is time for a change, warm the banner gently with a hair dryer on low and peel at a steady angle; adhesive-backed finishes release cleanly from glass when warm, and static cling simply pulls off with no residue. Wash around the decal with mild soap and a soft cloth, and avoid high-pressure sprayers aimed directly at the edges. If you are building a coordinated exterior, this banner pairs naturally with side graphics, tailgate lettering and smaller accent decals in the same finish. Sticking with one finish across all your pieces keeps the overall look consistent, whether that is an all-matte build or a full gloss treatment.

What you get

• Available in 4, 8, 12 or 18 inch banner heights
• Matte, gloss, clear and static cling finish options
• Cut from cast or calendered vinyl depending on finish
• Arrives pre-masked for easier alignment and installation
• Static cling option removes and repositions without adhesive
• Custom cut after ordering in the size you select
• Works on windshields, rear glass and smooth body panels

Specifications

Frequently asked questions

Which banner height should I choose?

The 4 and 8 inch heights are popular for a subtle band across the top of the windshield, while 12 and 18 inch cuts create a bolder statement. Check your local visibility regulations before choosing a taller banner, since laws on windshield obstruction vary by state.

Can I remove the banner later without damaging the glass?

Yes. Warm the decal gently with a hair dryer on low heat and peel it away at a steady angle. Static cling versions pull off with no adhesive at all, making them the easiest option for temporary use.

Will this fit my exact windshield width?

The banner is trimmed during installation to fit your glass, so slight width differences between trucks are not a problem. Apply the decal, press it down, and trim any excess at the edges with a sharp blade before removing the pre-mask.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.