Printed and cut to order in the USAMatte, gloss, static cling and clear vinylCustom sizes from 4 to 48 inchesSend your artwork for a quote

LEO Sticker

Maverick Tailgate Decal Set of 4 | Matte Vinyl Decal Pack

Price range: $22.99 through $32.99

A set of four matte vinyl decals cut for tailgate styling, offered in 4, 8, 12 or 18 inch sizes. Made for Maverick owners who want a clean, low-shine look on the back of their truck.

Free shippingUSA: 5-7 days. International: 10-12 days.
Four finishesMatte, gloss, static cling or clear vinyl.
Made to orderNo returns for change of mind. Damaged orders are refunded or replaced.
Custom artworkUpload a sketch, logo or photo before adding to cart.
Have your own design? Optional

JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.

Description

A set of four matte vinyl decals cut for tailgate styling, offered in 4, 8, 12 or 18 inch sizes. Made for Maverick owners who want a clean, low-shine look on the back of their truck.

Matte Tailgate Decal Set of 4 for Your Maverick

This decal pack includes four matching pieces cut from matte Cast Vinyl, sized to work together across the tailgate of a compact pickup. The matte finish absorbs light instead of bouncing it back, so the graphics read as painted-on rather than stuck-on. Each piece is die-cut with clean edges and no background film, which means only the design itself shows once applied. Choose 4 inch pieces for subtle accents near the handle or taillights, 8 inch for a balanced mid-size layout, or 12 and 18 inch pieces when you want the tailgate to carry the whole look. The set ships as a matched group, so spacing and proportion stay consistent no matter which size you pick.

Why a Matte Finish Works on a Truck Tailgate

Tailgates take a lot of sun, road spray and hand contact, and a matte surface hides fingerprints, dust and water spots far better than a glossy one. It also pairs naturally with matte bed liners, textured bumpers and flat-paint trims that many compact trucks wear from the factory. Our matte Cast Vinyl lays down with a smooth, uniform surface that resists the orange-peel texture you sometimes see on cheaper printed stickers. Because there is no clear carrier film left behind, the decal sits flush against the paint. If you later want a different mood, the same set is also available in gloss, clear and static cling finishes, so you can switch from low-key to high-impact without changing the design.

Applying Your Ford Maverick Decals Kit

Application takes a few minutes per piece with no special tools. Start by washing the tailgate and letting it dry completely, then wipe the application area with isopropyl alcohol to remove wax and residue. Peel the backing, position each decal using the edge of the tailgate or the lettering as a visual guide, and press from the center outward with a squeegee or a credit card wrapped in a soft cloth. Warm the vinyl slightly with a hair dryer on cool mornings so it conforms around body lines and handle recesses. Leave the vehicle unwashed for the first 24 to 48 hours so the adhesive fully bonds. Full illustrated instructions are included in every package.

Made in Our US, Built for Daily Drivers

Every set is printed and cut to order in our US workshop on calendered or Cast Vinyl depending on the finish you choose, so nothing sits in a warehouse losing tack before it reaches you. We pack each decal between protective liners and ship it in a rigid mailer so it arrives flat, not creased. The set of four gives you flexibility: use all pieces on the tailgate, split them between the tailgate and bed sides, or keep spares in the glovebox for a future refresh. If you run a tonneau cover, bike rack or hitch accessory, the decals sit thin enough not to interfere. Questions before ordering? Our small team answers messages directly.

What you get

  • Set of 4 matching matte vinyl decals cut for tailgate placement
  • Available in 4, 8, 12 or 18 inch decal sizes
  • Matte finish reads painted-on and hides fingerprints and dust
  • Die-cut with no background film for a flush, clean look
  • Applies with a squeegee and hair dryer; instructions included
  • Also offered in gloss, clear and static cling finishes
  • Printed and cut to order in our US

Specifications

Material Matte Cast Vinyl, die-cut with no background film
Finish Matte (also available in gloss, clear and static cling)
Application Dry application with squeegee; surface prep with isopropyl alcohol recommended
Set contents 4 matching decals, application instructions, protective liners

Frequently asked questions

Which size should I choose for my tailgate?

4 inch pieces work as subtle accents, 8 inch suits a balanced layout, and 12 or 18 inch pieces fill more of the tailgate. All four pieces in a set are the same size, so spacing stays consistent.

Will these damage my paint when I remove them?

Warm the decal with a hair dryer and peel slowly at a low angle. On well-adhered factory paint the vinyl typically releases without leaving residue; any leftover adhesive can be cleaned with isopropyl alcohol.

Can I use these somewhere other than the tailgate?

Yes. The set works on any smooth, clean, wax-free surface such as bed sides, toolboxes, windows or coolers. Avoid textured plastics and fresh paint that has not fully cured.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.

Additional information

Size

4 inch, 8 inch, 12 inch, 18 inch

Made to order in the USAEvery order is printed and cut to the width you choose.
Four finishesMatte, gloss, static cling and clear. No other finishes are offered.
Custom sizes 4 to 48 inchesOrder the width that fits your surface, height scales with the design.
Your own artwork welcomeSend a sketch or a logo file and we will quote it before you order.
We acceptVisaMastercardAmerican ExpressDiscoverPayPalApple PayGoogle PayShop Pay