Off-Road Stripe Decal Kit for Ford Explorer | LEO Sticker

Description

A matte and gloss vinyl stripe decal kit made for SUV owners who want a trail-ready look on their daily driver. Cut to order in four decal sizes so you can place stripes where they fit your build.

Why an Off-Road Stripe Kit Works on a Ford Explorer

A set of trail-inspired stripes gives a three-row SUV the kind of character that usually takes a full custom paint job to achieve. This kit is cut from Cast Vinyl in matte, gloss, clear and static cling finishes, so you can mix a subtle ghost stripe with a bold accent line or run a single finish across the whole layout. Each piece is trimmed to follow flat body panels, which makes placement straightforward along doors, fenders and the rear hatch. Because the kit is offered in 4, 8, 12 and 18 inch decal sizes, you can scale the design to suit a stock-height daily driver or a lifted weekend rig without cutting or trimming at home.

Choose Your Finish and Decal Size

Matte stripes sit low-key against factory paint and read best on darker vehicles, while gloss stripes add a clean contrast line that pops in daylight. Clear vinyl lets the body color show through the stripe shape, and static cling gives you a no-adhesive option for testing a layout before committing to permanent pieces. Every decal in the kit is available in 4, 8, 12 or 18 inch sizes, measured along the longest edge of each stripe. Smaller sizes work well for fender accents and mirror trim, while the larger sizes suit rocker panels and hood edges. Pick one size for a matched set or combine sizes for a layered Off-Road look.

How to Apply Your Explorer Stripe Decals

Start with a clean, dry surface free of wax and dust, then position each stripe with masking tape as a hinge before peeling the backing. Work from one edge outward with a squeegee or soft card to push air toward the open side, which prevents bubbles under the vinyl. Warm weather helps the material conform around gentle body lines, and a little heat from a hair dryer makes corners easier to set. Static cling pieces press on with just water and can be repositioned freely. Full adhesive decals are removable by peeling at an angle with gentle heat, though we do not promise a specific service life since sun exposure and care habits vary by region.

Caring for Stripes Between Trail Runs

Once applied, the vinyl holds up to normal hand washing and light trail dust. Avoid high-pressure spray directly at stripe edges and skip automated brush washes, since brushes can lift corners over time. If you wheel regularly, rinse mud off with a garden hose rather than scrubbing, and dry with a microfiber towel to keep grit from working under edges. Static cling pieces can be removed, rinsed and reapplied whenever you want a fresh layout. For adhesive decals, a quick wipe with isopropyl alcohol on a cloth removes dust from the surface without dulling the finish. Stored spare decals should stay flat and away from heat until you are ready to use them.

What you get

• Cast Vinyl stripe decals cut to order in matte, gloss, clear or static cling finishes
• Available in 4, 8, 12 or 18 inch decal sizes measured along the longest edge
• Trail-inspired Off-Road stripe layout designed for SUV body panels
• Mix finishes and sizes for a layered look or run a single matched set
• Static cling option lets you test placement with no adhesive commitment
• Bubble-free application with tape-hinge method and a squeegee or soft card
• Removable with gentle heat by peeling at an angle

Specifications

Frequently asked questions

Will these stripes fit my specific Explorer trim?

The kit is cut as a general Off-Road stripe layout rather than a trim-specific template. Because each decal comes in 4, 8, 12 or 18 inch sizes, you can position the pieces on flat panels wherever they fit your body style. We recommend measuring your target panels before ordering.

What is the difference between static cling and adhesive decals?

Static cling vinyl holds to smooth glass and glossy paint without adhesive, so you can remove and reposition it anytime. Adhesive matte, gloss and clear decals bond permanently for a longer-term look and are removed by peeling at an angle with gentle heat.

Can I layer different sizes or finishes in one kit?

Yes. Many customers pair a large gloss stripe with smaller matte accents or use clear pieces over painted sections. Order the sizes and finishes you want to combine, since each decal size is sold individually within the kit options.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.