Gloss Windshield Banner Decal for Ford Trucks & SUVs

Description

A gloss Cast Vinyl windshield banner decal cut to your choice of 4, 8, 12 or 18 inches. Made for Ford owners who want a clean, bold strip across the top of the glass.

A Gloss Banner That Finishes Your Ford Build

Whether you run a full ford bronco decal kit or you are starting with one statement piece, a windshield banner pulls the whole look together. This gloss banner decal is printed on Cast Vinyl with a shiny, wet-look finish that catches daylight across the top of your glass. It ships in your choice of 4, 8, 12 or 18 inch heights, so you can go subtle with a thin strip or bold with a tall band. The gloss surface wipes clean with the rest of your windshield and keeps its shine through regular washes. Apply it alone or pair it with side stripes and window decals for a matched setup.

Choose Your Banner Height Before You Order

Every truck and SUV windshield sits a little differently, so this banner is sold by height. A 4 inch strip sits neatly under the tint band and stays out of your sightline. An 8 inch banner makes a clear statement while leaving plenty of open glass. The 12 inch option works well on taller windshields where you want real presence. The 18 inch height is the boldest cut, covering the upper portion of the glass for a show-ready look. Measure the clear area of your windshield before ordering, and check your state's visibility rules, since some states limit how much of the glass can be covered.

Matte, Gloss, Clear and Static Cling Options

This listing is for the gloss finish, which gives a shiny, glass-like sheen that blends with your windshield. If you prefer a different look, the same banner style is also available in matte for a flat, low-shine appearance, in clear for a subtle frosted effect, or as a static cling version you can reposition and remove without adhesive. All versions are cut from quality vinyl designed for exterior vehicle use. The gloss finish is the most popular pick for banners because it reads as one continuous surface with the glass, especially after a fresh wash or a rain.

Application Tips for a Smooth, Bubble-Free Banner

Apply your banner on a dry day above 60F for best results. Clean the windshield with isopropyl alcohol and let it dry completely. Work with a friend if you can: one person holds the decal level while the other peels the backing a few inches at a time. Use a squeegee or a credit card wrapped in a soft cloth to press the vinyl down from the center outward, pushing air to the edges. Small bubbles can be lifted with a pin and smoothed flat. Avoid washing the truck for about 48 hours after application so the adhesive fully sets. With care, the banner lays flat with no wrinkles.

What you get

• Gloss Cast Vinyl windshield banner with a shiny, wet-look finish
• Available in 4, 8, 12 or 18 inch heights to fit your windshield
• Cut to order for a clean, straight edge across the glass
• Outdoor-rated vinyl designed for vehicle use
• Pressure-sensitive adhesive applies with a squeegee in minutes
• Pairs with side stripes, window decals and full decal kits
• Also available in matte, clear and static cling finishes

Specifications

Frequently asked questions

What height should I choose for my windshield?

A 4 inch banner is subtle and sits near the tint band, 8 inches is the most common choice, and 12 or 18 inches work for taller windshields or a bolder look. Measure your clear glass area and check local visibility laws before ordering.

Will the gloss finish match my windshield tint?

Gloss vinyl has a shiny, transparent-looking sheen that reads as part of the glass once applied. It is not tinted, so it will not darken your view like a tint band does.

Can I remove the banner later?

Yes. Warm the vinyl with a hair dryer or in direct sun, then peel it off slowly at an angle. Any remaining adhesive can be cleaned with isopropyl alcohol.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.