Bronco Side Stripe Decal Kit, Matte Vinyl

Bronco Side Stripe Decal Kit | Matte Vinyl Decal Set

A two-sided stripe decal kit cut from Cast Vinyl, made for owners who want a clean racing-stripe look along the doors and quarter panels. Choose matte, gloss, clear or static cling in 4, 8, 12 or 18 inch heights.

Free shippingUSA: 5-7 days. International: 10-12 days.

Four finishesMatte, gloss, static cling or clear vinyl.

Made to orderNo returns for change of mind. Damaged orders are refunded or replaced.

Custom artworkUpload a sketch, logo or photo before adding to cart.

Size

Clear

Have your own design? Optional

Upload a logo, sketch or photo

JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.

Description

A Bronco Side Stripe Decal Kit Built for Trail and Street

This side stripe decal kit is cut to follow the body line of your SUV, giving it a classic dual-stripe layout without the cost of a paint. Each set includes matching stripes for both the driver and passenger side, trimmed from Cast Vinyl that conforms around door handles, body creases and panel seams. Pick the height that fits your build: 4 inch for a subtle accent, 8 inch for a balanced look, 12 inch for a bold statement, or 18 inch for full-size coverage on lifted rigs. Whether your rig spends its weekends on rocky trails or parked at the office, the stripes install with basic tools and can be removed later without leaving adhesive residue behind.

Choose Your Finish and Vinyl Type

Every kit is printed and cut in our, and you choose the material that matches your plans. Matte vinyl gives a low-key, painted-on look that hides glare in photos. Gloss vinyl adds shine that reads like clear-coated paint. Clear vinyl works well when you want the stripe to show only where the ink lands, letting your factory paint color show through the open areas. Static cling is the pick for temporary use, such as events or photo shoots, since it holds without adhesive and peels off in seconds. All options are cut from cast or calendered vinyl, and each kit ships with transfer tape applied so the stripes lift off the backing sheet in one piece.

How to Install Your Side Stripes

Start with a clean, dry surface; wash the panels the day before and wipe them down with isopropyl alcohol right before application. Warm the decal slightly with a hair dryer so the vinyl relaxes, then position each stripe using the body line as your guide. Press from the center outward with a squeegee or soft card to push air toward the edges, working slowly around handles and curves. If a bubble stays trapped, a small pinhole lets you flatten it. Keep the vehicle dry for the first 24 hours so the adhesive bonds fully. Full step-by-step instructions are included in the package, and the process is the same for every size in the set.

Why Order This Decal Kit From Our

We cut every order after you place it, so nothing sits in a warehouse losing tack before it reaches you. Each kit is inspected before it ships, packed flat in a rigid mailer to prevent creases, and includes application tape, a squeegee card and printed instructions. If you are building out a full look, this set pairs with our hood stripes, fender accents and window graphics for a matched theme across the whole rig. Questions about sizing for your specific doors or quarter panels? Send us a message before ordering and we will help you pick between the 4, 8, 12 and 18 inch heights so the proportions look right on your build.

What you get

Two-sided stripe kit with matching driver and passenger pieces
Available in 4, 8, 12 or 18 inch stripe heights
Choose matte, gloss, clear or static cling vinyl
Cut from cast or calendered vinyl with transfer tape applied
Conforms around door handles, creases and panel seams
Includes squeegee card and printed install instructions
Made to order in our US and shipped flat in a rigid mailer

Specifications

Material	Cast or calendered vinyl, printed and cut to order
Finish	Matte, gloss, clear or static cling (select at checkout)
Application	Dry application with transfer tape; works on clean factory paint, glass and smooth body panels
Set contents	Matching stripe pair (driver and passenger side), transfer tape, squeegee card, printed instructions

Frequently asked questions

Which stripe height should I choose?

The 4 and 8 inch heights suit a subtle accent stripe, while 12 and 18 inch heights give a bolder, full-panel look. If your rig is lifted or runs larger tires, the taller sizes usually balance the proportions better. Message us with your model year and we can help you decide.

Will these stripes damage my paint?

Applied to a clean, factory-cured paint surface, the vinyl removes without pulling paint. Avoid installing on fresh paint, repainted panels or areas with peeling clear coat. Warm the decal with a hair dryer during removal and peel slowly at a low angle.

Can I take the stripes off and reuse them?

The matte, gloss and clear vinyl options are single-use, since the adhesive stretches during removal. Static cling is the reusable option; it attaches without adhesive and can be repositioned or stored flat for later use.