Gloss Racing Stripe Decal Kit for Model S | Pair

Description

A pair of gloss vinyl racing stripe decals cut to order, sized for owners who want a classic dual-stripe look on their Model S. Choose 4, 8, 12 or 18 inch stripe widths at checkout.

A Twin-Stripe Look for Your Model S

This decal kit gives your Model S the twin racing stripe treatment that performance cars have worn for decades. You receive two matching stripe decals, one for each side of the hood or trunk, cut from gloss Cast Vinyl with a smooth, paint-like shine. The gloss finish sits flush against clear-coated paint and reads as a factory-style accent rather than an add-on. Choose the stripe width that fits your build: a narrow 4 inch pair for a subtle hint of motion, 8 or 12 inches for the traditional muscle-car proportion, or a full 18 inch pair when you want the stripes to dominate the panel. Each stripe is cut to order so the pair you receive matches the size selected at checkout.

Why Drivers Pick Our Model Car Decals

Buyers browsing model car decals often tell us the same thing: they want something that looks intentional, not like a sticker slapped on after the fact. We cut every stripe pair from Cast Vinyl, which conforms to gentle panel curves without lifting at the edges. The gloss surface is easy to wipe clean during a normal wash and resists the fading that cheaper printed graphics show after a season in the sun. Application is a dry process with transfer tape, so you can reposition each stripe before committing to its final placement. No special tools are needed beyond a squeegee or soft card, and the kit ships with illustrated placement guidance so first-time installers get straight, even lines.

Choosing Your Stripe Width

Width changes the whole character of the kit. The 4 inch pair works well on the hood center of a Model S, framing the panel without covering much paint. An 8 inch pair is the most popular middle ground, wide enough to read clearly from across a parking lot but still leaving body color visible on both sides. The 12 inch pair suits owners pairing stripes with other accents, and the 18 inch pair makes a bold statement across the hood or rear deck. If you plan to run the stripes from bumper to bumper, remember that the pair covers a single panel section per stripe length, so measure your hood or trunk before ordering to confirm which width fits the space you have.

Care, Removal and Reordering

Once installed, treat the stripes like paint: wash with mild soap, avoid high-pressure spray directly at the edges, and skip abrasive waxes over the vinyl. When you are ready for a change, warm each stripe gently with a hair dryer on low and peel it away at a shallow angle; the adhesive is designed to release cleanly from factory clear coat. If you move to a different vehicle or want a fresh pair in another width, reorder the same kit in the size you need. Because every pair is cut after you order, we can keep all four widths available without inventory limits. Questions about placement or sizing before you buy? Reach out and we will help you pick the right width for your panels.

What you get

• Pair of matching racing stripe decals, one per side
• Gloss Cast Vinyl with a smooth, paint-like finish
• Four width options: 4, 8, 12 or 18 inches
• Dry application with transfer tape for repositioning during install
• Conforms to gentle panel curves without lifting at the edges
• Removes cleanly with low heat when you want a change
• Cut to order in the USA

Specifications

Frequently asked questions

Will these stripes fit my Model S hood?

The kit is sold by stripe width, not by vehicle panel length, so measure the area you want to cover before ordering. All four widths, 4 through 18 inches, work on a full-size sedan hood or trunk when placed as a centered pair.

Can I install the stripes myself?

Yes. Each stripe ships on transfer tape so you can position it, step back to check alignment, and press it down once it looks right. A squeegee or old credit card is the only tool most installers need.

How do I remove the stripes later?

Warm the vinyl gently with a hair dryer on low heat and peel slowly at a shallow angle. The adhesive releases from factory clear coat without aggressive scraping.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.