Gloss Windshield Banner Decal for Jeep Windshield Decals

Description

A gloss finish windshield banner decal cut from Cast Vinyl, made for drivers who want a clean top-of-glass statement. Available in 4, 8, 12 or 18 inch heights.

A Banner That Frames Your Jeep Windshield Decals

This banner decal is cut to run across the top of your windshield, giving your rig a finished, custom look without crowding the glass. The gloss finish catches daylight the same way a freshly cleaned window does, so the banner reads sharp from the road. It pairs naturally with other jeep windshield decals you already run, filling the strip above the mirror line that usually goes bare. Choose a 4 inch strip for a subtle accent, an 8 or 12 inch band for a balanced look, or the full 18 inch height when you want the banner to be the main event. Every decal is cut to order in our US from Cast Vinyl, so the edges come clean and the shape stays true.

Why Cast Vinyl With a Gloss Finish

We print this banner on Cast Vinyl because it conforms to curved glass without fighting back. Windshields bow more than most people notice, and a stiff film will lift, tent, or silver at the edges. Cast Vinyl lays down flat, follows the curve, and holds its shape through sun, rain, and car washes. The gloss surface adds depth to solid colors and makes the printed areas read wet and smooth even when the glass is dry. It also wipes clean with the same glass cleaner you already use. We do not coat this product or add overlays; the gloss is the face of the vinyl itself, so it cannot peel away as a separate layer.

Measuring Your Glass Before You Order

Height is the measurement that matters most here, and it is the number you are choosing at checkout. Before ordering, sit in the driver seat and look at where the banner will sit. A 4 inch strip stays above your sight line even on short glass, while an 18 inch banner will drop into the upper portion of your view and may not be legal in every state, so check your local tint and obstruction rules first. Measure the width of your glass at the height you want the banner to end, since you will trim the ends during installation. A paper strip taped across the top of the glass is the quickest way to preview the height before you commit.

Installing a Wide Banner Without Wrinkles

Wide decals go on best with two people and a wet method. Mix a few drops of dish soap in a spray bottle of water, mist the glass, and float the decal into position before squeegeeing from the center outward. The soap lets you slide the banner left or right to center it, and it pushes air out ahead of the squeegee instead of trapping it. Keep the backing paper on the outer foot of each end until the middle is set, then work outward and trim the excess at the glass edges with a fresh blade. Skip the install on a freezing morning or in direct summer sun; glass around 60 to 80 degrees Fahrenheit takes the vinyl best.

What you get

• Cut from Cast Vinyl that conforms to curved windshield glass
• Gloss finish for a smooth, light-catching face
• Height options of 4, 8, 12 or 18 inches
• Printed and cut to order in our US
• Trim-to-fit width for custom glass widths
• Matte, clear, and static cling versions also available on request
• Wet-install friendly with application tape included

Specifications

Frequently asked questions

Will an 18 inch banner block my view while driving?

An 18 inch banner covers a large part of the upper windshield and will enter your sight line on most vehicles. Many states restrict how much of the glass can be covered above the AS-1 line, so check your local regulations before choosing the tallest option. The 4 and 8 inch heights sit above the typical view line.

How wide is the banner?

The banner ships wider than typical windshields so you can trim the ends for a custom fit during installation. Measure your glass width at the height where the banner will end, and trim with a fresh blade after the center is applied.

Can I get this banner in a different finish?

Yes. This listing is for the gloss version, but we also cut this banner in matte, clear, and static cling finishes. Static cling is a good choice if you want a removable option that peels off without adhesive residue.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.