Jeep Wrangler Spare Tire Cover Decal Set | LEO Sticker

Description

A vinyl decal set sized for Jeep Wrangler spare tire covers, printed in your choice of matte, gloss, clear or static cling. Choose the width that matches your wheel from 12 to 48 inches.

Spare Tire Decals Sized for Jeep Wrangler Rear Wheels

The spare tire on the back of a Jeep Wrangler is one of the most visible spots on the whole vehicle, and this decal set is cut to fill it. Instead of guessing at fit, you pick the width that matches your wheel, from 12 inches up to 48 inches across, so the design sits centered on the spare cover without overhang or awkward gaps. The decal follows the rounded face of the tire cover and trims cleanly around the valve stem area when needed. Whether you run a stock spare or a larger aftermarket wheel, there is a size in the range that works. Not affiliated with or endorsed by the manufacturer.

How to Measure Your Spare Cover Before Ordering

Getting the right size takes about two minutes. Measure straight across the face of your spare tire cover, from edge to edge, at the widest point, and use that number to choose your decal width. If you are between sizes, most installers choose the smaller option so the decal stays clear of the sidewall stitching or any raised lettering on the cover. Measure with the tire cold and the vehicle parked on flat ground for the most accurate reading. If your spare sits on a swing-out carrier, measure the cover itself rather than the carrier opening. A paper template trick also helps: trace the cover face, cut it out, and hold the decal size against it before applying.

Finish Options: Matte, Gloss, Clear and Static Cling

Every set is available in four finishes, so you can match the look of the rest of your jeep wrangler decals. Matte has a flat, low-sheen surface that blends into textured tire covers and hides glare in direct sun. Gloss adds a shiny, wet-look surface that makes colors pop. Clear vinyl prints the design on a transparent background, so the color of your cover shows through around the artwork. Static cling has no adhesive at all and peels off without residue, which is handy if you swap designs seasonally or share the vehicle. All four are printed on cast or calendered vinyl with inks rated for outdoor exposure.

Applying Your Tire Decal in the Driveway

Application works best on a warm, dry day with the spare cover clean and free of wax or dressing. Wipe the surface down with isopropyl alcohol and let it fully dry. Peel the backing, position the decal by its transfer tape, and press from the center outward with a squeegee or the edge of a credit card to push out air. Work slowly around the curve of the cover, letting the vinyl stretch gently rather than forcing it. Once the decal is down, go over the edges once more, then peel the transfer tape at a low angle. Keep the vehicle dry for the first day so the adhesive sets up fully.

What you get

• Sold as a set with width options from 12 to 48 inches
• Cut to fit Jeep Wrangler spare tire covers; not affiliated with or endorsed by the manufacturer
• Four finish choices: matte, gloss, clear and static cling
• Printed on cast or calendered vinyl with outdoor-rated inks
• Static cling version removes clean with no adhesive residue
• Includes transfer tape for centered, bubble-free application
• Wipes clean with mild soap and water

Specifications

Frequently asked questions

What size should I order for my spare tire?

Measure straight across the face of your spare tire cover at its widest point and choose the matching width. If you land between sizes, go with the smaller one so the decal stays off the edges and any raised stitching.

Will this work on a fabric or vinyl spare cover?

Matte, gloss and clear adhesive vinyl bonds best to smooth vinyl or hard covers. Static cling needs a very smooth, non-porous surface and will not grip textured fabric covers well.

Can I remove the decal later?

Yes. Warm the decal with a hair dryer on low and peel it slowly at a shallow angle. Static cling peels off by hand with no residue, which makes it the easiest option if you plan to change designs often.