Jeep Decal Set for Wrangler Doors & Off-Road Rigs 4x4

Description

A cast vinyl Jeep decal set designed for Wrangler doors, hoods, and trail rigs, offered in widths from 12 to 48 inches. Made for off-road enthusiasts who want trail-ready graphics that hold up to dust, mud, and washes.

A Jeep Decal Built for Trail Life

This Jeep decal set was drawn with the off-road community in mind: bold, readable graphics that look right at home on a dusty tailgate or a freshly washed hood. Each decal is cut from cast vinyl, which conforms to the slight texture and curves found on Jeep Wrangler doors, fenders, and body panels. Whether you run forest service roads, rock trails, or just the grocery run on Saturday, the design reads clean from a distance and up close. Choose the width that fits your build, from a subtle 12-inch accent to a full 48-inch statement across the hood or door line.

Fits Jeep Wrangler Doors and More

The set is sized to work on Jeep Wrangler doors, though the decals can be applied anywhere with a smooth, flat surface: toolboxes, coolers, roof racks, trailers, or camper shells. Because every build is different, we offer multiple width options so you can pair a large hood piece with smaller door accents. Application is a standard peel-and-stick process with transfer tape, and the matte, gloss, clear, and static cling finish options let you match the look to your rig. Not affiliated with or endorsed by the manufacturer.

Finishes and How to Choose

Matte is the popular pick for trail rigs because it blends with flat paint and tonneau covers and hides fingerprints. Gloss adds punch on clean, waxed paint and reads well in photos. Clear finishes work when you want the design to float on the surface with a subtle edge, and static cling gives you a removable option for rentals, events, or lease vehicles where you do not want adhesive at all. All four options are printed in our shop on cast vinyl using weather-resistant inks suited to outdoor exposure on a working vehicle.

Applying Your Decals the Right Way

Start with a clean, dry surface; wash the panel and wipe it down with isopropyl alcohol to remove wax and road film. Warm the decal slightly with a hair dryer in cool weather so the vinyl lays flat, then use a squeegee or credit card to press from the center outward, working air toward the edges. Peel the transfer tape slowly at a sharp angle. Avoid applying in direct sun or below about 50 degrees Fahrenheit. Wait a few days before pressure washing over the graphic. Full instructions ship with every set.

What you get

• Cast vinyl construction cut and printed in our USA shop
• Available in widths from 12 to 48 inches as a coordinated set
• Choose matte, gloss, clear, or static cling finish
• Peel-and-stick application with transfer tape included
• Sized for Jeep Wrangler doors, hoods, and flat rig surfaces
• Weather-resistant inks for outdoor trail use
• Static cling option removes clean with no adhesive residue

Specifications

Frequently asked questions

Will these fit my Jeep Wrangler doors?

Yes, the set is sized with Jeep Wrangler doors in mind, and multiple width options let you scale the design to fit hoods, fenders, or other flat panels. Not affiliated with or endorsed by the manufacturer.

Can I remove the decal later?

Yes. Warm the vinyl with a hair dryer and peel it away slowly; any remaining adhesive can be cleaned with isopropyl alcohol. The static cling option peels off with no adhesive at all, which is handy for leased or rented vehicles.

Will it survive mud, car washes, and trail dust?

The decals are printed on cast vinyl with weather-resistant inks intended for outdoor use. Hand washing is gentler on graphics, and letting the decal settle for a few days before any pressure wash helps it hold its edge.