American Flag Rear Window Decal for Jeep Wrangler JK

Description

A matte American flag decal sized for the rear window of Jeep Wrangler models. Cut from outdoor-rated cast vinyl in widths from 12 to 48 inches.

A Rear Window Flag That Fits Your Jeep

This American flag decal is designed for the rear window of Jeep Wrangler models, so the proportions work with the glass rather than fighting it. You choose the width, from 12 inches up to 48 inches, and we cut the stripes to scale so the flag keeps its shape at any size. Smaller widths suit a corner placement or a spare tire cover, while the larger sizes can span most of the rear window for a bolder look. Because it is cut to order, the decal arrives ready to position, with no trimming needed on your end. Not affiliated with or endorsed by the manufacturer.

Matte Cast Vinyl Built for Outdoor Use

We print this flag on matte cast vinyl, a conformable material that lays flat on glass without lifting at the edges. The matte finish cuts glare, so the flag stays readable in direct sun instead of washing out or turning into a mirror. Inks are outdoor-grade and laminated into the vinyl rather than sitting on top, which helps the reds and blues hold their color through washes, rain, and road grime. It is the same material we use across our jeep decals line, chosen because it holds up to daily driving and cleans up with mild soap and water. No plastic sheen, no peeling corners after the first car wash.

Applying It in One Sitting

Application takes about fifteen minutes with basic tools: a spray bottle of soapy water, a squeegee or credit card, and a lint-free cloth. Clean the glass, wet the surface, peel the backing, and float the decal into position. The wet method lets you slide it until the stripes sit level with the window edge, then squeegee out the water working from the center outward. Detailed step-by-step instructions ship in the package. If you prefer a temporary option, ask us about our static cling version of this flag, which goes on and peels off with no adhesive at all.

Choosing Your Width and Placement

Measure your rear window before ordering. A 12-inch width works well beside the spare tire or on a quarter window, 24 inches covers roughly half of a standard rear window, and 36 to 48 inches fills the glass for drivers who want the flag to read from three cars back. The decal is cut with the canton in the upper left, so it displays correctly when viewed from outside the vehicle. Each set includes transfer tape, backing paper, and application instructions. If you are between sizes, we suggest measuring the flat glass area only, excluding any rubber seal or wiper path.

What you get

• Cut from matte cast vinyl with outdoor-grade laminated inks
• Available in widths from 12 to 48 inches, cut to scale
• Designed for Jeep Wrangler rear window glass
• Matte finish reduces glare in direct sunlight
• Wet-application method allows repositioning before squeegeeing
• Includes transfer tape and printed instructions
• Static cling version available on request

Specifications

Frequently asked questions

Will this fit the rear window on my Jeep Wrangler?

The decal is proportioned for Wrangler rear window glass, and the width options from 12 to 48 inches let you match your specific window. Measure the flat glass area before ordering. Not affiliated with or endorsed by the manufacturer.

How do I remove the decal later?

Warm the decal with a hair dryer on low and peel it from one corner. Any remaining adhesive wipes away with glass cleaner or isopropyl alcohol. Removal leaves no residue when done warm.

Can I take it through a car wash?

Yes. Once the decal has fully cured, typically after a few days, standard car washes are fine. Avoid high-pressure spray directly on the edges during the first week.