Jeep Gladiator American Flag Hood Stripe Decal Kit

Description

Matte or gloss American flag stripe decals cut to fit the hood of a Jeep Gladiator. A simple way to add a patriotic accent to your truck without paint or permanent modification.

American Flag Hood Stripes for Jeep Gladiator

This vinyl hood decal kit lays a set of American flag stripes across the hood of your Jeep Gladiator, sized to work with the hood's flat panel and center creases. Each stripe is individually cut from cast vinyl, so you can space the stripes to your taste or run them edge to edge for a full flag look. Choose matte for a low-sheen, painted-on appearance or gloss for a brighter finish that stands out against flat body panels. The kit is printed and cut to order in our shop and ships with everything needed for a do-it-yourself install. Not affiliated with or endorsed by the manufacturer.

Choose Your Width from 12 to 48 Inches

Every truck owner sets up their hood a little differently, so this kit is offered in a range of widths from 12 inches up to 48 inches. A narrower set sits near the center of the hood as a subtle accent, while the wider options stretch across the full hood panel for a bolder statement. Measure the area you want to cover before ordering and compare it against the listed widths to find the best match for your build. Each set includes the same stripe count and layout regardless of width, so the proportions of the flag design stay consistent as the size increases.

How to Install Your Hood Decal Kit

Installation is a dry application that most owners complete in under an hour with basic tools. Start with a clean, dry hood; wax residue, dust, and grease are the most common causes of edges lifting later. Lay out the stripes first without removing the backing to confirm your spacing, then peel and apply one stripe at a time, working from the center outward to push air toward the edges. A felt-edge squeegee and low-tack masking tape help hold alignment. On warm days the vinyl conforms more easily around the hood's creases. Full step-by-step instructions are included in the package.

Caring for Stripes on the Trail and in the Car Wash

Once applied, these jeep gladiator decals hold up to regular washing and normal outdoor driving. Hand washing is the gentlest option; if you use an automatic wash, touchless is easier on decal edges than brush-style washers. Avoid aiming high-pressure spray directly at stripe edges. For everyday dust, a soft cloth and mild soap are all you need. If you ever want to remove the kit, warm the vinyl gently with a hair dryer and peel it away slowly; any leftover adhesive can be cleaned off with a citrus-based remover. The hood underneath is left unharmed.

What you get

• American flag stripe layout cut for the Jeep Gladiator hood
• Available in matte, gloss, clear, and static cling finishes
• Width options from 12 inches to 48 inches
• Individually cut cast vinyl stripes for custom spacing
• Dry-application install with printed instructions included
• Made to order in our US shop
• Removable with heat without damaging the paint underneath

Specifications

Frequently asked questions

Will these stripes fit my Jeep Gladiator hood?

The kit is laid out for the Gladiator hood panel and comes in widths from 12 to 48 inches. Measure the hood area you want to cover and choose the closest width. Not affiliated with or endorsed by the manufacturer.

Can I adjust the spacing between the stripes?

Yes. Each stripe is a separate piece, so you can space them closer together or farther apart, and trim the ends with a sharp blade if you want a custom edge.

What finish should I choose?

Matte gives a muted, painted-on look that blends with flat body panels. Gloss adds shine and contrast. Clear works over existing graphics, and static cling is a temporary, non-adhesive option.