Jeep Grand Cherokee Side Stripe Kit | Matte & Gloss Vinyl

Description

A two-side stripe kit cut to follow the body line of the Jeep Grand Cherokee. Choose matte, gloss, clear or static cling vinyl in widths from 12 to 48 inches.

Side Stripes Made for the Grand Cherokee Body Line

This stripe kit is cut as a pair, one for each side of your Jeep Grand Cherokee, so you can dress up both doors in a single afternoon. The stripes are sized to run along the lower body line where they read clearly from the curb without overwhelming the paint. Because every Grand Cherokee generation sits a little differently, we offer widths from 12 to 48 inches, letting you pick a subtle accent or a wide rally-style band. If you are browsing our wider range of jeep grand cherokee decals, this kit is the most popular starting point. Not affiliated with or endorsed by the manufacturer.

Choose Your Finish and Width

Every kit is printed on cast or calendered vinyl in your choice of matte, gloss, clear or static cling. Matte gives a low-key, painted-on look that hides glare. Gloss reads like fresh paint and pops against flat factory colors. Clear works over any paint color when you want the shape without the color, and static cling lets you test placement or run the stripes seasonally without adhesive. Width options run from a slim 12-inch stripe up to a full 48-inch band. Measure the flat area between your wheel arches and body creases before ordering so the stripe sits cleanly on the panel.

How Installation Works

Application is a dry or wet lay-up with a squeegee, the same method used for any die-cut vinyl decal. Start with a clean, wax-free panel and warm the vinyl slightly in cooler weather so it conforms around body creases. The carrier film keeps the stripe aligned while you press it down, then peels away to leave the stripe in place. Static cling versions press on with a squeegee and no water at all. Take your time on the door handle and crease areas, working outward to push air toward the edges. Most installs on a Grand Cherokee take under an hour for both sides.

Care, Removal and Ordering

Wash around the stripes by hand or at a touch-free wash, and avoid high-pressure nozzles aimed directly at the stripe edge. When you are ready for a change, warm the vinyl with a hair dryer and peel it back slowly; cast vinyl typically releases cleanly from factory paint. Static cling can be peeled off and repositioned any time. Each kit ships as a matched pair with application film and illustrated instructions. Pick your finish and width from the dropdown before checkout, and the kit is cut to order for your Grand Cherokee. Not affiliated with or endorsed by the manufacturer.

What you get

• Sold as a matched pair, one stripe for each side of the vehicle
• Cut for the Jeep Grand Cherokee body line, with widths from 12 to 48 inches
• Available in matte, gloss, clear and static cling vinyl
• Printed on cast or calendered vinyl with application film included
• Dry or wet application with a standard squeegee
• Illustrated step-by-step instructions in every kit
• Static cling option is removable and repositionable

Specifications

Frequently asked questions

Will these stripes fit my Grand Cherokee?

The kit is cut as a pair for the Jeep Grand Cherokee body line, with widths from 12 to 48 inches so you can match your generation's panel shape. Measure the flat area between your wheel arches before ordering. Not affiliated with or endorsed by the manufacturer.

Which finish should I choose?

Matte gives a subtle painted-on look, gloss reads like fresh paint, clear shows the shape over any paint color, and static cling lets you remove and reposition the stripes without adhesive.

Can I remove the stripes later?

Yes. Warm the vinyl with a hair dryer and peel it back slowly. Static cling peels off at any time and can be reapplied.