Matte Black Fender Flare Decals for Jeep Cherokee | Set

Description

Matte black cast vinyl fender flare decals cut to fit Jeep Cherokee fenders. A low-gloss blackout look for owners who want the style without painting or replacing flares.

A Blackout Look for Your Jeep Cherokee Fenders

These matte black fender flare decals give your Jeep Cherokee a darker, more aggressive stance in an afternoon. Instead of pulling the flares off, prepping them, and spraying paint, you apply a precision-cut vinyl layer that follows the flare's shape. The matte finish absorbs light rather than bouncing it back, so it reads as painted plastic instead of sticker. It's a popular upgrade for owners pairing it with other jeep cherokee decals like hood stripes or door accents. Sold as a complete set with width options from 12 to 48 inches, so you can match the coverage to how your flares sit on the body.

Matte Cast Vinyl That Reads Like Paint

We print these decals on matte cast vinyl, the flexible grade that conforms to the gentle curves and rolled edges of a fender flare without lifting or silvering. Calendered films can fight you on curved trim; cast vinyl lays down flat and stays there when applied warm. The matte surface resists glare, hides fingerprints and water spots far better than gloss, and keeps a consistent low-sheen texture across the whole set. Edges are machine-cut for a clean line, and the black is opaque enough to cover the factory flare color underneath with a single layer. Not affiliated with or endorsed by the manufacturer.

Sizing and What Comes in the Set

Each order is a full fender flare set, not a single piece, so all four corners of your Cherokee get the same finish. Choose your width from the 12, 16, 20, 24, 30, 36, 42, or 48 inch options depending on how much of the flare you want wrapped and how much body color you want left visible. Wider options suit owners going for a full blackout; narrower cuts work as accent trim along the flare edge. Application tape keeps each decal aligned during install, and the set ships with instructions. Measure your flare width at the widest point before ordering to pick the right option.

Applying Your Fender Flare Decals

Start with a clean flare: wash off road grime, wipe the surface with isopropyl alcohol, and let it dry completely. Peel the backing, position the decal starting from one end, and squeegee from the center outward to push air toward the edges. On cooler days, warm the vinyl slightly with a hair dryer so it stretches around the flare's curves. Work slowly and lift and reposition if needed before pressing everything down firmly. Park the vehicle somewhere dry for the first day. When you eventually want a change, warm the decal and peel it off without leaving residue on the factory flare.

What you get

• Matte black cast vinyl cut as a full fender flare set
• Width options from 12 to 48 inches to match your coverage
• Low-gloss finish that reads like painted flare trim
• Conforms to curved fender flare surfaces when applied warm
• Precision machine-cut edges for a clean outline
• Removable with heat without leaving residue
• Application tape and instructions included with every set

Specifications

Frequently asked questions

Will these decals fit my Jeep Cherokee fender flares?

They are cut as a fender flare set sized for Jeep Cherokee flares, with width options from 12 to 48 inches. Measure the widest point of your flare before ordering to choose the best fit. Not affiliated with or endorsed by the manufacturer.

Can I remove the decals later without damaging the flares?

Yes. Warm the vinyl with a hair dryer or heat gun on a low setting and peel slowly. The adhesive releases cleanly from the factory flare surface without leaving residue.

Why matte instead of gloss?

Matte absorbs light, so the decals look like painted plastic trim rather than a shiny sticker. It also hides water spots, dust, and fingerprints better than a gloss finish.