Hunting Stickers

Opening weekend is hard on gear. Mud, frost, truck washes and months in a cold blind chew up cheap paper labels fast. These hunting stickers are cut from adhesive vinyl rated for outdoor use, so they hold up on rear truck windows, toolbox lids, gun cases, coolers, ATVs and camp lockers through season after season. Designs cover whitetail, elk, mule deer, duck, goose, turkey and bowhunting themes, plus general public-land and hunting-camp artwork. Most are kiss-cut singles you can peel and apply one-handed in the field, and they ship from the US, typically arriving within a few business days.

What Hunting Stickers Covers

This collection sits inside our Sports & Fan Stickers category alongside fishing, football and team decals, but the use case here is different. Fan stickers mostly live on a car or a laptop. Hunting stickers get bolted, strapped and dragged into the woods. That is why every design listed here is printed or cut on vinyl with an outdoor-rated adhesive rather than a paper sticker stock.

The audience is broad: whitetail hunters marking lease trucks and trail cameras, waterfowlers labeling gun cases and decoy bags, turkey hunters, elk and mule deer hunters out West, and bowhunters who want a small arrow or broadhead decal on a truck quarter window. They also get used as gifts, club stickers for hunting camps, and raffle or banquet handouts. If you need dozens at once for a club or event, our Bulk & Wholesale Stickers collection covers volume pricing.

Vinyl Options for Hunting Stickers

Most hunting decals in this collection are cut or printed on intermediate calendered vinyl, a workhorse material with a solvent adhesive that holds on glass, painted metal and many plastics for years of outdoor exposure. Larger or premium designs sometimes use cast vinyl, which conforms better to curved surfaces such as truck bed caps, toolboxes and fuel cans, and resists shrinking over long installs.

Finish options vary by design:

• Gloss: the most common, with a shiny laminate layer that resists abrasion from brush, straps and wash racks.
• Matte: cuts glare and looks closer to a powder-coated or painted mark, popular on gun cases and matte truck trim.
• Gloss: printed on gloss vinyl, a shiny finish that stands out on ATVs, trailers and walking gear.
• Clear: a specialty finish on a handful of designs, mostly for smaller laptop and tumbler sizes.

Printed designs are finished with a gloss or matte overlaminate. Die-cut single-color decals are cut directly from solid vinyl with no ink to fade.

Sizing and Placement for Hunting Stickers

Most designs come in multiple widths, and picking the right one saves a redo. Common sizes and where they fit:

• 3 to 4 inches: water bottles, tumblers, gun case lids, tackle boxes, hard coolers.
• 5 to 6 inches: truck quarter windows, rear side glass, toolboxes, ATV racks, trail camera cases.
• 8 to 12 inches: rear windshields, truck toppers, deer blinds, cargo trailers, camp doors.
• 12 inches and up: full tailgate or rear window statement pieces and trailer panels.

Before ordering, measure the flat area you have. On truck glass, stay at least 1 inch clear of defroster lines at the edges and keep the decal out of the wiper path so grit does not scuff it. On textured plastics like kayak decks or rotomolded coolers, expect a shorter hold time than on glass or painted metal. For placement on the go, our Car & Truck Decals collection has additional vehicle-specific guidance.

Installation and Care for Hunting Stickers

Step-by-step for a clean install:

• 1. Clean the surface with isopropyl alcohol and a lint-free towel. Skip glass cleaner with ammonia, which leaves a film.
• 2. Position the decal with small pieces of masking tape, or tape one edge as a hinge for long designs.
• 3. Peel the backing at a sharp angle while holding the transfer tape taut.
• 4. Apply from the center outward with a squeegee or credit card. On laminated prints over about 8 inches, use a felt-edge squeegee to avoid scratching.
• 5. Pull the transfer tape back slowly at a 180-degree angle against itself, not straight up.
• 6. If air bubbles remain, pierce with a pin and press flat. Do not slice with a blade on glass.

Care is simple. Wait 48 hours before pressure washing near the decal, and avoid aiming the wand directly at its edge. For routine washing, soap, water and a soft cloth are fine. Avoid picking at edges, and skip solvent cleaners on printed designs since they can haze the laminate.

Buying Guide for Hunting Stickers

A short decision list:

• Going on truck glass? Choose 5 to 8 inches, gloss or matte, in a calendered vinyl or better.
• Curved surface like a toolbox or topper? Step up to cast vinyl so it conforms.
• Gun case, cooler or locker? A 3 to 4 inch matte decal keeps a low profile and resists scuffs.
• Riding on an ATV or trailer? Consider a gloss or matte finish for a bold look on early drives.
• Buying for a club or banquet? Order a quantity mix of small sizes and check bulk pricing first.
• Single color or full print? Die-cut vinyl has no ink to fade; printed designs allow detailed art and photo-style graphics.

Related collections

Frequently asked questions

Will these stickers survive a truck wash and winter weather?

Yes, when installed on a clean surface and given 48 hours to bond before washing. Calendered vinyl and cast films are rated for years of outdoor exposure, including frost, sun and road salt. Avoid direct pressure-washer contact on the decal edge, which is the most common cause of lifting.

Can I put a hunting decal on my rear window without blocking my view?

Size down and place it in a corner of the glass. A 5 to 6 inch decal on a quarter window or lower corner of a rear windshield is visible without creating a large blind spot. Check your state's obstruction laws if you plan a full-width window decal, since rules vary.

Do they stick to gun cases, coolers and plastic totes?

They stick well to smooth painted metal and glossy or lightly textured plastics like most hard coolers and gun case lids. Deeply textured rotomolded surfaces hold less reliably because the adhesive only contacts the high points. Firm pressure with a squeegee improves the bond on light texture.

What is the difference between a die-cut decal and a printed sticker?

A die-cut decal is cut from solid colored vinyl, so there is no ink to fade and it typically lasts longer outdoors. A printed sticker allows full-color, detailed artwork and is finished with a gloss or matte laminate that helps protect it against sunlight and wear. Both are outdoor-rated, but die-cut wins on pure longevity.

How long does shipping take?

Orders ship from the US, and standard shipping typically arrives within a few business days depending on your location. Larger custom orders and mixed bulk orders can take longer to produce. If you need decals before an event like a club banquet or opening day, check the listed processing time on each product before ordering.

Can I remove a hunting sticker later without damaging paint or glass?

Yes. Warm the decal with a hair dryer or heat gun on low to soften the adhesive, then peel it back slowly at a shallow angle. Remaining adhesive comes off with isopropyl alcohol or a citrus-based remover. On painted surfaces, avoid aggressive scraping and test any remover in a hidden spot first.