By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
You want your MacBook lid to look like yours, not like every other laptop in the coffee shop. This collection covers small-format vinyl stickers and cut-to-shape decals sized for the MacBook Air and MacBook Pro lid, palm rest, and trackpad area.
Showing all 8 resultsSorted by popularity
You want your MacBook lid to look like yours, not like every other laptop in the coffee shop. This collection covers small-format vinyl stickers and cut-to-shape decals sized for the MacBook Air and MacBook Pro lid, palm rest, and trackpad area. Every design here is cut in a small-format process with a removable adhesive, so it peels off without leaving residue when you change jobs, sell the machine, or just want a new look. Cutouts are sized around the Apple logo and camera housing so the design lines up instead of sitting awkwardly off-center.
These stickers are made for Apple laptop surfaces, which are flat, smooth, and unforgiving of oversized cuts. The collection includes lid decals, trackpad and palm rest pieces, small accent stickers for the area around the logo, and full-lid coverage designs. It suits students, remote workers, developers who travel with their machines, and anyone reselling a MacBook later and needing a clean surface.
If you are decorating something other than a MacBook, our wider Laptop Stickers collection covers non-Apple machines, and Keyboard Stickers covers the keycaps themselves. For larger vehicles and windows, see Car & Truck Decals.
Most small-format laptop decals use cast vinyl, which is thin and conformable enough to lay flat on an aluminum lid without lifting at the edges. Calendered vinyl also appears in this category; it is thicker and more economical but can shrink slightly over long periods, so it works best on smaller accent pieces. Common films you will see across the category include cast vinyl and cast vinyl for cut graphics, and cast vinyl where a textured wrap-style finish is offered.
Finishes include matte, which cuts glare and hides fingerprints on a glossy lid, gloss with a laminate layer for scratch resistance, and static cling or clear options for a subtle look. Many pieces ship on an air-release liner with channels that let trapped air escape during application, which matters on a surface this visible.
Measure before you order. The usable lid area on a 13-inch MacBook is roughly 11.5 by 8 inches after accounting for the Apple logo and the rounded corners. On a 14-inch and 16-inch MacBook Pro, plan for about 12.5 by 8.5 inches and 14.5 by 9.5 inches respectively. Trackpad overlays are typically cut around 4.5 by 3 inches to match the glass without covering the edges.
For palm rest pieces, keep at least 0.25 inches of clearance from the trackpad and 0.5 inches from the screen hinge so the decal does not catch when the lid closes. Small accent stickers in the 1 to 3 inch range work well clustered around the logo. If a design is listed for a specific MacBook model, trust that listing over a generic size chart.
Applying a MacBook sticker takes a few minutes with the right steps:
A short decision list:
No, as long as you use the removable adhesive products in this collection and peel them off slowly at room temperature. Warm the decal slightly with a hair dryer on low if it has been on for a long time, then pull from one corner at a shallow angle. Any remaining adhesive lifts with isopropyl alcohol and a microfiber cloth.
Some do, and some are cut for a specific model. The lid sizes differ, so a full-lid decal sized for a 13-inch Air will not fill a 16-inch Pro lid. Check the listed dimensions against your machine before ordering, and measure the flat area of your lid, not the screen diagonal, for the best match.
Cast and calendered vinyl with removable adhesive is designed not to damage anodized aluminum. The risk comes from leaving a decal on for years and pulling it aggressively, which can occasionally pull at the surface. Slow removal at a low angle keeps this from happening.
Yes, if you want to cover it, but many designs in this collection are cut with a logo-shaped cutout so the logo shows through the artwork. If you prefer a fully covered lid, choose a design without the cutout. Either way, the camera area stays clear on all cutouts.
On a laptop that lives mostly indoors, expect a cast vinyl decal to look good for several years. Constant backpack friction, heat from a closed lid, and frequent cleaning shorten that. Matte and gloss-laminated finishes hold up better to abrasion than clear films.
Yes, orders ship from within the United States, so domestic delivery is measured in days rather than weeks. Small-format decals ship flat in a rigid mailer to prevent bending. Check the shipping options at checkout for your zip code and current delivery times.
Your shopping cart is empty
Notifications
