By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A clean single-line mountain decal cut from matte vinyl, sized for MacBook lids and other smooth laptop surfaces. Made for anyone who wants a subtle outdoors touch without cluttering their device.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This macbook Vinyl Decal keeps things simple: one continuous line traces a ridgeline from base to peak, with nothing else competing for attention. The thin outline reads clearly from across a room but stays understated up close, so it works whether your lid is bare or already carries a few small stickers. Because the design is a single stroke, it pairs naturally with the clean aluminum look of modern laptops. Choose the size that fits your lid best, apply it along the edge or centered near the hinge, and the mountain sits quietly in place. It is a small piece of the outdoors for people who spend their day in front of a screen.
We print and cut this decal on matte Cast Vinyl, which produces a flat, non-shiny finish that blends with brushed laptop surfaces instead of sitting on top of them like a glossy label. The material is thin and flexible, so it follows the gentle curve of a laptop lid without lifting at the edges. Matte also hides fingerprints and small smudges far better than a gloss finish would, which matters on a surface you open and close every day. Each decal arrives weeded by hand, with the excess vinyl removed, and ships with transfer tape so the whole line lifts off the backing in one piece.
Every laptop lid is a little different, so this design comes in four decal sizes: 4, 8, 12 and 18 inches, measured along the longest edge of the design. A 4-inch decal works as a small accent near a corner or on a tablet. An 8-inch size suits most 13-inch laptops without crowding the lid. The 12-inch option fills the lid of a 15-inch machine nicely, and 18 inches spans larger workstations or works on flat surfaces like a desk, water bottle panel or window. Measure the flat area of your lid before ordering and pick the size that leaves comfortable margin on all sides.
Application takes a few minutes with no tools beyond a card or squeegee. Start with a clean, dry lid, free of dust and oils, since debris under the vinyl shows through a thin line design. Peel the transfer tape and decal from the backing, position the mountain where you want it, and press from the center outward to push air toward the edges. Rub firmly over the whole line, then peel the tape back slowly at a low angle so the vinyl stays on the lid. If a small bubble appears, work it toward the nearest edge with your thumb. The decal can be removed later by peeling from one end, ideally with mild warmth from a hair dryer.
The decal uses a removable adhesive designed for smooth surfaces. When you want to take it off, peel slowly from one end and apply mild warmth from a hair dryer if the vinyl resists. Avoid pulling straight up, which can leave residue on some finishes.
For most 13-inch laptops, the 8-inch decal is a good fit, leaving margin around the design. If you want the mountain to span more of the lid, the 12-inch size works on larger lids. Measure the flat area of your lid first to confirm.
Yes. It adheres to any clean, smooth, flat surface such as a tablet back, water bottle panel, notebook cover or window. Avoid textured or fabric surfaces, since the thin line design needs full contact to stay down.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
