By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
You just spent a weekend detailing your Civic and the paint looks great, but the car still reads stock. A well-placed Honda decal closes that gap without committing to a wrap or paint work.
Showing 33-37 of 37 resultsSorted by popularity
You just spent a weekend detailing your Civic and the paint looks great, but the car still reads stock. A well-placed Honda decal closes that gap without committing to a wrap or paint work. This collection gathers cut vinyl graphics sized for Honda body panels, windows and bumpers, from small logo decals for the rear quarter window to wide stripes for an Accord hood. Every decal is cut to order in the US and shipped flat so it arrives ready to apply. Whether you drive a Civic Si, a CR-V that sees trail dust, or an Odyssey that lives in the carpool lane, there is a size and finish here that fits how you actually use the vehicle.
This collection covers single-color cut vinyl decals and multi-piece graphics for Honda cars and SUVs. Common placements include rear windows, front fenders, rocker panels, hoods and tailgates. Designs range from Honda wordmarks and model-specific scripts to racing stripes, pinstripes and accent graphics.
Typical buyers fall into a few groups. Daily drivers who want a subtle rear window decal. Track and autocross drivers marking class numbers or sponsor logos. Owners of older Hondas doing a refresh who want period-correct accents. And parents or commuters who want something personal without repainting anything. If you need dozens of identical decals for an event or shop, the Bulk & Wholesale Stickers collection is the better starting point.
Two vinyl families matter for vehicle graphics. Calendered vinyl is about 6 mil thick, budget friendly, and works well on flat or gently curved panels like windows, hoods and doors. Expect roughly five to seven years of outdoor life depending on sun exposure. Cast vinyl is thinner and more conformable, so it hugs compound curves like mirrors, bumpers and fender arches without lifting. Cast also lasts longer outdoors, often seven years or more.
Finish options include matte, gloss, clear and static cling. Matte suits flat or darker paint, while gloss adds shine and cleans easily. Clear vinyl works well over existing paint or glass, and static cling is a removable option for windows. Any decal in full sun benefits from a gloss laminate layer, which helps protect the print from fading and scratches. Decals applied over paint with curves should use a product with an air-release liner to reduce trapped bubbles.
Match decal size to the panel, not the other way around. For a Civic or Accord rear window, a decal 8 to 12 inches wide sits comfortably between the defroster lines without covering the third brake light. Side window or quarter panel decals work best at 4 to 6 inches. Fender badges and small accents typically run 3 to 5 inches.
Hood and roof stripes are a different calculation. Measure the flat area between body lines first. A Civic hood usually accepts stripes 6 to 10 inches wide per side, while an Accord or CR-V hood can carry 10 to 14 inch widths. Rocker panel graphics for a CR-V or Pilot should be measured against the space between the wheel arches, often 50 to 70 inches, and ordered in sections if the panel has door breaks. On the tailgate of a CR-V or Ridgeline, leave at least 2 inches of clearance from the badge and handle so edges do not catch on cleaning mitts.
Step one: apply above 50 degrees Fahrenheit and out of direct sun. Step two: wash the panel with dish soap and water, then wipe with isopropyl alcohol and a lint-free towel. Step three: position the decal with masking tape hinges at the top edge and confirm placement before committing. Step four: peel the backing slowly while holding the transfer tape taut. Step five: squeegee from the center outward with firm, overlapping strokes. Step six: for curved areas, use a heat gun on low to soften the vinyl and stretch it into the curve, then re-squeegee. Step seven: wait 10 to 15 minutes, then peel the transfer tape back on itself at a 180 degree angle.
For care, wait 48 hours before washing. Hand wash with mild soap and a soft mitt, avoiding direct pressure washer nozzles within a foot of the edges. On rear windows, keep defroster use normal, but avoid ice scrapers directly on the decal. Park in shade when possible, since printed vinyl can fade over time with sun exposure, and reposition or replace the decal if the print begins to look worn.
Work through this short list before ordering:
On factory paint in good condition, removal is safe. Warm the decal with a heat gun or hair dryer on low and peel it back slowly at a shallow angle. Any remaining adhesive comes off with isopropyl alcohol or a dedicated adhesive remover. Avoid pulling cold vinyl in winter, as it can tear and leave residue. If the paint is already failing or the car has been repainted, test a corner first.
Yes. The defroster elements are on the inside of the glass, and the decal goes on the outside, so the lines are unaffected. The only caution is removal years later: pull slowly and warm the vinyl so it does not shred across the lines. Also keep the decal clear of the wiper path on the rear window of hatchbacks and wagons.
Measure the usable glass between the trim and the third brake light, then subtract about an inch on each side. For most Civics and Accords, a decal 8 to 12 inches wide fills the space well. Smaller 4 to 6 inch decals suit quarter windows and look intentional rather than undersized. Avoid oversized decals that wrap onto the trim, as edges there lift faster.
Decals ship flat or loosely rolled in a rigid mailer or tube, never folded, so the vinyl and transfer tape arrive crease free. Orders ship from the US, typically within a few business days. Larger hood stripes and rocker graphics go in tubes. If a decal arrives creased from carrier handling, contact us before applying it.
Wait at least 48 hours, and ideally 72 in cool or humid weather, before any wash. The adhesive needs time to fully bond to the panel. After that, hand washing is safest. If you use an automatic wash, choose a brushless one and skip high-pressure spray directly on the decal edges. Pressure washers should stay at least a foot away from edges.
Yes. Many designs in this collection can be produced in different vinyl colors, including gloss and matte finishes, and resized to fit your specific panel. Send the year, model and the panel you want to cover, plus your measurements, and we can confirm the best option. For fully custom artwork, the Custom Stickers collection covers one-offs and small runs.
Your shopping cart is empty
Notifications
