By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A matte black Vinyl Decal kit designed for Civic owners who want a clean, layered Graphic look. Cut from Cast Vinyl in your choice of four decal sizes.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This decal kit was laid out with the Civic's long doors and low beltline in mind, so the stripes and accents follow the natural flow of the body instead of fighting it. Each piece is cut individually, which means you can place the main graphics along the rocker panels, break the secondary pieces across the fenders, or run a single accent up the hood. The matte black finish sits flat against factory paint and reads as a subtle tone-on-tone look on darker cars while standing out cleanly on lighter colors. Because the pieces are separate, you control the final layout, and you can trim around Graphic, moldings, or door handles with a hobby knife before smoothing everything down.
Every Graphic in this kit is printed and cut on Cast Vinyl, the conformable material that bends around gentle curves without lifting at the edges. The matte black finish cuts glare instead of reflecting sunlight the way a gloss decal would, which keeps the look understated at car meets and in photos alike. Application uses a wet method: spray the panel, float the decal into position, squeegee out the liquid, and let it set. The air-egress channels in the material let trapped air escape as you work, so bubbles push out instead of getting trapped under the Graphic. Full instructions are included with every order.
The kit is sold by decal size, with four options: 4, 8, 12, or 18 inches. Size refers to the tallest Graphic in the set, and every other piece is scaled proportionally so the whole layout stays balanced no matter which option you pick. The 4-inch set works as a subtle accent near Graphic or mirrors, 8 inches suits side skirt and quarter panel trim, 12 inches fills a door panel nicely, and 18 inches makes a bolder statement running the length of the car. If you are layering this kit with other decals you already run, the smaller sizes pair well without crowding existing graphics.
Plan the install on a dry day with panels cleaned of wax and grease, ideally in shade so the surface is cool to the touch. Work one panel at a time, use the wet method for positioning, and let the kit cure for a day before washing the car. When you wash, hand washing is gentler on the edges than a brush tunnel, and avoiding direct pressure washing at the Graphic edges helps them stay down. If you ever want the look gone, warm the vinyl with a hair dryer on low and peel it back slowly; Cast Vinyl is designed to come off in one piece without leaving hard residue behind, so the paint underneath stays as you left it.
The graphics are cut as individual pieces rather than pre-spaced for one specific panel, so they can be arranged on a wide range of Civic body styles. Layout is up to you, and pieces can be trimmed to clear Graphic, moldings, and handles.
The size you choose refers to the tallest decal in the set, and the remaining pieces are scaled to match. Pick 4 or 8 inches for accents, 12 inches for door panels, or 18 inches for a full-length side Graphic.
Most customers install this kit at home using the included instructions. The wet method lets you slide each piece into place before committing, and the air-release material pushes bubbles out as you squeegee.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
