By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
The Silverado 1500 is a full size pickup, and its owners tend to use decals in a few predictable ways. The wide, flat tailgate is the single most requested placement, usually for a single word, a logo, or a hunting and fishing graphic.
Showing the single result
The Silverado 1500 is a full size pickup, and its owners tend to use decals in a few predictable ways. The wide, flat tailgate is the single most requested placement, usually for a single word, a logo, or a hunting and fishing graphic. Bed sides and rear window areas are popular for longer horizontal designs, while front doors and fenders often carry smaller accents. Because this truck shares its basic body style with GMC's equivalent full size pickup, many designs fit either. On this page you will find placement options, sizing ranges, material notes, and installation tips specific to pickup panels.
Pickup bodies offer more usable flat surface than most vehicles, and the Silverado 1500 is no exception. Common placements include:
Exact panel dimensions vary by cab configuration, bed length, and trim, so treat any listed size as a starting point and measure your own truck before ordering. As general ranges:
Always measure the flat area you want to cover, accounting for body lines, badges, and door handles.
Most decals for this truck are cut from calendared or cast vinyl. Calendared vinyl is the economical choice and works well on flat panels like the tailgate and bed sides. Cast vinyl conforms more easily around compound curves such as fender arches and door handles, and it tends to resist shrinking over long horizontal runs. If the decal will sit on the bed side where it faces road spray and bed rail contact, a thicker vinyl with a laminated or printed surface generally holds up better. Matte and gloss finishes both work on factory paint.
Install in shade with panel temperatures between roughly 60 and 80 degrees Fahrenheit. Clean each panel with isopropyl alcohol and a lint free cloth, and remove tailgate badges or work around them if you cannot. On bed sides, watch for textured plastic wheel arch trim, which standard vinyl does not adhere to well. Use a hinge method with masking tape for long horizontal designs, and squeegee from the center outward. On the tailgate, keep the decal clear of the latch and handle recesses. Wait several days before pressure washing the truck.
In many cases yes. The GMC equivalent shares the same basic full size pickup body style, so tailgate, bed side, and door placements are similar. Panel dimensions still vary by configuration, so measure your own truck before ordering rather than relying on the badge alone.
Not always. Many tailgate graphics are sized to sit above or below factory badges. If the decal must overlap them, removal is cleaner than trimming around the badge, which can leave visible edges. Fishing line or plastic trim tools can usually release the adhesive without damaging paint.
Standard vinyl does not bond reliably to textured plastic cladding. It can lift at the edges within weeks. Either end the design at the smooth painted area above the trim, or use a material specifically rated for textured surfaces if your truck has body cladding there.
Wait at least 48 to 72 hours before hand washing, and about a week before any pressure washing or automatic car wash. Adhesive continues to bond over the first few days, and high pressure water at the edge of a fresh decal is a common cause of lifting.
Your shopping cart is empty
Notifications
