By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A matte vinyl tailgate decal kit sized for Silverado 1500 owners who want a clean, custom look on the back of their truck. Choose from 4, 8, 12 or 18 inch decal sizes.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This Vinyl Decal kit is designed for the tailgate panel on a Silverado 1500, giving the back of your truck a finished, custom appearance without paint or permanent modification. Each kit is cut from Cast Vinyl with a matte finish that reads as a flat, painted look rather than a shiny sticker, so it blends in with textured bed panels and tonneau covers. Whether you drive a work truck or a weekend hauler, the kit installs with basic tools in a driveway or garage. Choose the decal size that matches your tailgate layout: 4, 8, 12 or 18 inches. Not affiliated with or endorsed by the manufacturer.
The kit is printed on Cast Vinyl, a thin, conformable material that follows the gentle contours and panel lines of a tailgate without lifting at the edges. The matte surface cuts glare in direct sun, which helps the graphics stay readable in photos and at the boat ramp. The printed design is available in matte or gloss finishes, so you can pick the look that suits your truck. Because the vinyl is cut rather than printed edge to edge, there is no clear border around the design, so the decal looks painted on once applied. Clean the tailgate, wet-position the decal, squeegee it flat, and peel the carrier film.
Every truck owner sets up their tailgate differently, so this kit comes in four decal sizes: 4, 8, 12 and 18 inches. The 4 and 8 inch sizes work well for accent placement near the handle recess or beside a backup camera, while the 12 and 18 inch options suit owners who want a bold centerpiece across the main tailgate panel. Measure the flat area you plan to cover before ordering, and keep in mind any camera, Graphic or handle cutouts on your specific trim. The collection includes styles that pair with Chevrolet decals for tailgate panels across multiple Silverado 1500 model years.
Application works best on a clean, dry tailgate above about 60 degrees Fahrenheit. Use isopropyl alcohol to remove wax and dust, then position each decal with masking tape before committing to placement. A felt-edge squeegee smooths the vinyl from the center outward to push out air and moisture. When you are ready for a change, warm the decal with a hair dryer or heat gun on low and peel it away slowly; the adhesive releases without aggressive scraping. Avoid high-pressure washers aimed directly at the edges. Routine hand washing and spray wax will keep the matte finish looking consistent season after season.
The kit is sized for Silverado 1500 tailgate panels, but trim levels vary in camera, Graphic and handle placement. Measure the flat area you want to cover and compare it to the 4, 8, 12 or 18 inch decal size before ordering. Not affiliated with or endorsed by the manufacturer.
Yes. Warm the decal with a hair dryer or heat gun on low and peel slowly. The adhesive is designed to release without hard scraping, though some residue may remain on older applications and can be cleaned with adhesive remover.
Lifespan depends on climate, sun exposure and how you wash the truck. Hand washing and parking out of direct sun when possible helps the matte finish stay consistent. We do not promise a specific service life.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications