Tribal Edge Truck Decals | Car & Truck Vinyl Decal Sets

Description

Bold tribal edge vinyl decals for cars and trucks, cut as a matching set and available in 12-inch to 48-inch widths. A strong choice for drivers who want sharp graphic accents on doors, fenders or tailgates.

Tribal Decals Built for Truck Doors and Fenders

This tribal edge design brings a sharp, angular graphic to the sides of your truck or car. Each decal is cut from solid vinyl with clean, precise edges, so the pointed lines and sweeping curves stay crisp once applied. The set is sold as a pair, with one decal for each side of the vehicle, and you choose the overall width from 12 inches up to 48 inches to match your body panel. Whether you want a subtle accent behind the front wheel or a large graphic that runs the length of your door, the same artwork scales to fit. Apply it to painted panels, glass or smooth bed covers for a custom look without a full wrap.

Choose Your Finish: Matte, Gloss, Clear or Static Cling

Every tribal edge decal is printed on your choice of four finishes. Matte gives a low-key, painted-on look that blends with flat or matte paint. Gloss adds shine that stands out against darker vehicles. Clear vinyl works when you want the graphic to read as part of the paint with a barely-there edge. Static cling is the pick for temporary display, since it holds to glass without adhesive and peels away clean. All options use cast or calendered vinyl cut to shape, with application tape on top so the design lifts off the backing in one piece. Pick the finish that matches how long you plan to keep the graphic on the vehicle.

How to Size Your Tribal Edge Set

Width is measured at the widest point of the decal, and the full design scales in proportion, so a 48-inch set is not just longer but taller as well. Before ordering, measure the flat area of your door, fender or tailgate and leave room around door handles, body lines and trim. A 12- to 18-inch width suits fenders, mirrors and rear windows. Mid sizes from 24 to 36 inches fit most single cab and extended cab doors. The 40- and 48-inch options work on full-size truck doors, tailgates or running the length of a bed side. When in doubt, choose the smaller size to avoid wrapping over curves.

Applying and Caring for Your Decals

Apply to a clean, dry surface when the temperature is mild and the panel is out of direct sun. Wash and dry the area first, then position the decal with the application tape still in place. Use a squeegee or credit card to press from the center outward, working air toward the edges. Peel the tape slowly at a low angle. For adhesive vinyl, avoid pressure washing directly at the edges and hand wash with mild soap. Static cling versions can be removed and repositioned on glass at any time. If you store a decal before applying it, keep it flat and out of heat so the vinyl stays workable.

What you get

• Sold as a matching set for both sides of your vehicle
• Available in 12", 18", 24", 30", 36", 40" and 48" widths
• Choose matte, gloss, clear or static cling finish
• Cut from cast or calendered vinyl with precise, clean edges
• Ships with application tape for one-piece installation
• Works on painted panels, glass, tailgates and smooth bed covers
• Static cling option removes clean from glass without adhesive

Specifications

Frequently asked questions

Do I get one decal or a pair?

Each order includes two matching decals so you can apply the graphic to both sides of your car or truck.

How do I know which width to pick?

Measure the flat area of the panel where the decal will go, keeping clearance from handles, trim and body lines. The design scales with the width, so a larger size is also taller. If the space is tight, choose the smaller option.

Can I remove the decal later?

Yes. Warm the adhesive vinyl gently with a hair dryer and peel it away slowly at a low angle. Any residue can be cleaned with mild soap and water. Static cling peels off glass with no residue at all.