Tribal Decals for Trucks | Zion Spear Vinyl Graphics

Description

A bold tribal spear graphic cut from durable vinyl, sized for cars, trucks and semis. Choose a width from 12 to 48 inches to fit your ride.

Tribal Decals That Bring Sharp Style to Any Rig

The Zion Spear design is a layered tribal graphic with pointed, sweeping lines that read as motion even when your truck is parked. It works as a single statement piece on a tailgate or door, or as a mirrored pair running down the sides of a semi trailer. The clean edges and negative space in the design hold up visually at both small and large sizes, so the same artwork looks intentional whether you order a 12-inch accent or a full 48-inch spear. If you have been searching for tribal decals that go beyond simple flame stickers, this spear graphic gives your build a more angular, aggressive look.

Choose Your Width from 12 to 48 Inches

Every order is cut to the width you select at checkout, from 12 inches up to 48 inches. A 12 to 18 inch decal suits car doors, toolboxes, and motorcycle fairings. Mid-range sizes in the 24 to 36 inch range are popular for pickup beds, tailgates, and semi cab doors. The full 48 inch width makes a strong side graphic on a trailer or a hood centerpiece on a work truck. Measure the flat area where you plan to apply the decal before ordering, and remember that the height scales with the width to keep the design proportions correct.

Matte, Gloss, Static Cling and Clear Options

Each spear graphic is available in your choice of four finishes. Matte cast vinyl gives the look of painted-on graphics and hides glare in photos. Gloss calendered vinyl delivers a shiny, wet-look finish that pops against flat paint. Static cling offers a temporary option that peels off clean with no adhesive, which is useful for leased trucks or seasonal displays. Clear vinyl works when you want the design printed with a subtle, tinted appearance over glass or light surfaces. Whatever finish you pick, the vinyl is cut and weeded by hand so the lines stay crisp from edge to edge.

Application Tips for Cars, Trucks and Semis

Apply the decal to a clean, dry surface above 50 degrees Fahrenheit for best results. Wash the area with dish soap and water, then wipe with isopropyl alcohol to remove any wax or residue. Peel the backing paper, position the graphic using the transfer tape, and squeegee from the center outward to push out air. Slowly pull the tape back on itself at a flat angle. On semis, avoid applying over rivets, seams, or corrugated panels where the vinyl cannot make full contact. The decal can be removed later by peeling warm vinyl and cleaning off any adhesive residue with a heat source and adhesive remover.

Built for Highway Miles and Long Hauls

These tribal decals are cut from durable vinyl rated for outdoor use, so they hold up against sun, rain, road grime, and pressure washing. The matte finish reduces glare under bright sun, while gloss adds a polished shine that stands out at truck stops and job sites. Static cling and clear options give you flexibility if you want a look you can reposition or remove without adhesive residue. Each decal resists fading and peeling when applied to a clean, flat surface, making it a practical choice for trucks that log serious miles. Whether your rig runs regional routes or crosses the country, the graphics keep their edges sharp and their color intact season after season.

How to Order the Right Tribal Decal for Your Truck

Start by measuring the area where you plan to place the graphic, then pick a width between 12 and 48 inches that fits without crowding panels, door seams, or handles. Next, choose the finish that matches your truck's surface: matte works well on darker paint, gloss pops on lighter colors, clear blends into glass, and static cling suits temporary displays. Clean the application area with soap and water, let it dry fully, and apply on a mild day for the best adhesion. If you run a fleet, ordering matching tribal decals in the same width and finish keeps every truck consistent. Review your measurements twice before checkout to confirm the size you selected.

What you get

• Tribal Zion Spear graphic cut to order in widths from 12 to 48 inches
• Available in matte, gloss, static cling, and clear vinyl finishes
• Hand-cut and weeded vinyl with crisp, clean edges
• Suitable for car doors, truck tailgates, toolboxes, and semi trailers
• Indoor or outdoor application on smooth, flat surfaces
• Removable with heat and adhesive remover when you are ready for a change
• Made to order in the USA by LEO Sticker

Specifications

Frequently asked questions

Is this decal sold as a pair?

Each order includes one spear decal. If you want mirrored graphics on both sides of your truck or trailer, order two and note that the design can be flipped during application by rotating the transfer sheet.

Will the 48 inch size fit my semi trailer door?

The 48 inch width is cut to fit large flat panels like trailer sides and cab doors. Measure your flat application area first, since trailer doors often include handles, hinges, or seams that reduce usable space.

Can I remove it without damaging the paint?

Yes. Warm the vinyl with a hair dryer or heat gun on a low setting and peel it away slowly, then clean any remaining adhesive with a citrus or isopropyl-based adhesive remover. Static cling versions peel off with no residue at all.