By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A set of Cast Vinyl racing stripe decals designed for truck owners who want a bold motorsport look. Choose from 4, 8, 12 or 18 inch stripe widths to match your build.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This decal kit is sold by stripe width, so you can dial in the exact look you want. A 4 inch pair sits close and clean, giving a subtle performance hint that works well on smaller hoods and tailgates. The 8 inch option is the most popular middle ground, wide enough to read at a distance without overwhelming the paint. Step up to 12 inch stripes for a classic muscle-truck stance, or go all the way to 18 inch for a full race-style layout across the hood and roof. Measure the panels you plan to cover before ordering so the proportions look right on your truck.
Every kit ships as a pre-masked set, which keeps the stripe alignment steady while you work. Start with a clean, dry, wax-free surface and work in moderate temperatures out of direct sunlight. Peel the backing, position the stripe using the masking layer as a carrier, and squeegee from the center outward to push air toward the edges. The vinyl is forgiving enough to lift and reposition during the first few minutes if your line drifts. Once everything is seated, go over the edges again with firm, even pressure, then remove the masking slowly at a low angle. Full step-by-step instructions are included in the box.
Gloss is the traditional choice and reads like painted-on striping under most lighting. Matte flips the look entirely, giving a flat, modern contrast against glossy factory paint. Clear stripes are cut from transparent vinyl, so they protect the paint underneath while staying nearly invisible until the light catches them. Static cling versions use no adhesive at all, which makes them a smart pick for truck shows, weekend events, or anyone who wants to remove the stripes without residue. All four finishes are printed in-house on cast or calendered vinyl depending on the option you select.
We cut every stripe set to order in our US rather than pulling pre-boxed stock, so each kit leaves with fresh vinyl and clean edges. The toyota racing stripes collection this kit belongs to was built around what full-size truck owners actually ask for: straight-cut stripe pairs, consistent widths, and a finish lineup that covers both permanent and temporary installs. If you are pairing stripes with other decals from the same collection, ordering in the same finish keeps the sheen consistent across the whole layout. Questions about sizing or finish matching can go straight to our team before you order.
The kit is sold by stripe width, not by vehicle model, so it is not model-specific. Measure the hood, roof or tailgate area you want to cover and pick the width that fits those panels. Trim-to-fit adjustments can be made during installation if needed.
Yes. Adhesive-backed finishes can be peeled away, and warming the vinyl gently with a hair dryer makes removal easier. Static cling versions remove instantly with no adhesive at all, since they attach without any sticky layer.
Gloss blends in with most factory paint and looks painted-on. Matte creates deliberate contrast against glossy paint and hides fingerprints and light swirls better. If you want a low-commitment look, clear or static cling are the most understated options.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
