By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A single center racing stripe decal cut from Cast Vinyl, made for truck owners who want a clean, bold stripe down the middle of the hood, roof or tailgate. Available in 4, 8, 12 or 18 inch widths.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This is a single-piece center racing stripe, designed to run straight down the middle of your truck for a symmetrical, factory-style performance look. Each decal is cut to order from Cast Vinyl in your choice of width, so you can go subtle with a 4 inch stripe or make a statement with an 18 inch band. The single-decal format means no aligning two separate halves and no seam down the center. It works well on hoods, roofs, tailgates and toolboxes, and it pairs naturally with other Toyota racing stripes in our truck decal collection if you want to extend the theme across the whole vehicle.
Choose the finish that fits your build. Matte vinyl gives a low-sheen, almost painted-on appearance that hides fingerprints and works well on flat or Low-Gloss paint. Gloss vinyl delivers a shiny, wet-look finish that stands out against flat paint. Static cling lets you apply and reposition the stripe without adhesive, which is handy for truck shows or seasonal use. Clear vinyl is ideal when you want a protective stripe over existing graphics or a subtle layered look. Every option is cut from quality cast or calendered vinyl suited to smooth exterior surfaces, and each one applies with standard wet or dry methods using transfer tape.
Start with a clean, dry surface free of wax and dust, ideally working in moderate temperatures away from direct sun. Mark your centerline with painter's tape before peeling the backing so the stripe lands exactly where you want it. Apply from the center outward with a squeegee to push air toward the edges, and take your time over hood contours and body lines, gently heating the vinyl so it conforms without stretching. For wider 12 and 18 inch stripes, a helper holding the decal level makes alignment much easier. Once applied, avoid pressure washing directly at the edges for the first day while the adhesive sets.
This stripe is sold by decal width: 4, 8, 12 or 18 inches. A 4 or 8 inch stripe suits owners who want a slim accent line, while 12 and 18 inch widths create the broad center band look popular on full-size trucks. Before ordering, measure the area you plan to cover, keeping in mind hood scoops, hood vents and panel gaps that may interrupt a continuous run. Each order includes the single stripe decal, transfer tape and basic application instructions. If you are layering this with additional Toyota racing stripes or other decals from our, order everything at once so the finishes match across the set.
Measure the surface you want to cover first. A 4 or 8 inch stripe gives a slim accent line, while 12 and 18 inch widths create a broad center band. Account for hood scoops, vents and panel gaps that may interrupt the stripe.
Yes. Adhesive vinyl can be removed by peeling slowly, ideally with gentle heat to soften the material. Static cling removes cleanly with no adhesive residue and can be repositioned or reused.
This is a universal decal, not a vehicle-specific kit, so check your measurements against the available widths before ordering. It trims easily during installation if you need to shorten it for your application.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications