Shark Teeth Fighter Jet Decal for Trucks | Nose Art

Description

A fighter-jet shark-teeth decal set that brings classic warbird nose art to your truck or car. Cut from cast vinyl in your choice of width from 12 to 48 inches.

Warbird Nose Art for Your Truck

The shark-mouth grin is one of the most recognizable paint schemes in aviation history, and this decal set translates it cleanly onto the road. Each tooth, gum line and eye detail is cut from solid-color cast vinyl, so the design reads bold from a distance and crisp up close. Whether you run a work truck, a weekend off-roader or a daily commuter that needs some attitude, the set gives your front end the look of a fighter squadron rolling down the runway. Choose your width and place it on the hood, fender, door or tailgate wherever the bite fits your build.

Matte, Gloss, Clear and Cling Options

Every shark-teeth decal is offered in the four finishes we print in-house. Matte cuts glare and gives the design a painted-on, factory-finish look that blends with flat or matte paintwork. Gloss adds depth and shine that pops against darker vehicles. Clear vinyl carries the artwork with a nearly invisible carrier for a subtle effect, and static cling mounts without adhesive so you can reposition or remove it anytime. Pick the finish that matches how you want the teeth to sit on your paint, from understated to full display.

Sizing From 12 to 48 Inches Wide

The set comes in your choice of overall width, from a 12-inch version suited to fenders, mirrors and toolboxes up to a 48-inch layout sized for full hoods and tailgates on full-size trucks. As the width increases, every element of the mouth scales proportionally, so the design keeps its proportions at any size. Before ordering, measure the flat area where you plan to apply it and compare it to the listed width. A little breathing room around the edges makes installation easier and keeps the tips of the teeth clear of body lines and trim.

Easy Application and Clean Removal

Application is a standard wet-or-dry vinyl install: clean the surface, position the decal, squeegee from the center outward and peel the transfer tape. Detailed instructions ship with every set, and the flexible cast vinyl conforms to gentle curves and body contours without lifting at the edges. When you are ready for a change, warm the decal with a hair dryer and peel it away slowly. Because we cut each set to order in our shop, you get fresh vinyl that handles cleanly from the first peel to the final squeegee pass.

Built for Highway Speeds and Weather

This shark teeth fighter jet decal is printed on vinyl with your choice of gloss, matte, static cling, or clear finish. The printed ink layer sits beneath a laminate on gloss and matte versions, which helps the design stand up to daily handling. Static cling and clear finishes offer lighter-duty options for drivers who prefer a temporary look or want the graphic to appear painted directly on the surface. Applied correctly, the decal can be mounted on a hood, fender, tailgate, or trailer door for a bold custom touch. How the decal holds up to rain, sun, car washes, and road grime depends on conditions and care over time.

A Gift That Lands With Truck Enthusiasts

Searching for a present for the truck owner who has everything? This nose art decal makes a memorable gift for birthdays, holidays, retirements, or fleet milestones. The shark teeth design draws on classic aviation heritage, giving any truck, van, or SUV an aggressive, personalized character without permanent paintwork. It ships rolled in protective packaging, arriving ready to apply with no special tools required beyond a squeegee or credit card and a spray bottle of soapy water. Recipients can choose their preferred finish and width at checkout, making it easy to match the decal to their vehicle style. Fleet operators also use these decals to build team identity across multiple trucks, creating a coordinated look that turns heads at rest stops and job sites. Give the gift of instant attitude.

What you get

• Classic fighter-jet shark-mouth nose art design cut from solid-color vinyl
• Available in 12, 24, 36 and 48-inch overall widths
• Choice of matte, gloss, clear or static cling finish
• Cast vinyl conforms to gentle curves and body lines
• Printed and cut to order in our US shop
• Ships with transfer tape and step-by-step application instructions
• Removable with heat when you are ready to change your look

Specifications

Frequently asked questions

What size should I order for my truck?

Measure the flat area where you want the decal, then choose the width that fits with an inch or two of margin on each side. A 12-inch set suits fenders and toolboxes, while 36 to 48 inches works well on full-size truck hoods and tailgates.

Which finish looks most like painted nose art?

Matte is the closest match to a painted-on look, since it reflects little light and blends with most paint. Gloss gives the design more shine and contrast, while clear and static cling offer subtler or temporary options.

Can I remove the decal later without damaging paint?

Yes. Warm the decal with a hair dryer and peel it back slowly at a low angle. Avoid picking at cold vinyl, and avoid applying decals over fresh or repainted surfaces until the paint has fully cured.