Red White & Blue Stars and Stripes Truck Decal Set

Description

A patriotic stars and stripes decal set cut from cast vinyl, made for cars and trucks that need bold American color. Choose the width that fits your build, from 12 to 48 inches.

Stars and Stripes Racing Stripes for Trucks

This set turns the classic custom racing stripes look into a full red, white and blue statement. The stars and stripes layout runs the length of your hood, roof or tailgate in clean parallel bands, so the flag reads clearly from a distance without looking like a busy wrap. Each stripe is cut separately, which means you can space the bands to match your body lines, trim width or existing graphics. Trucks with wide hoods and long beds tend to carry the larger sizes well, while cars and smaller crossovers sit better with the 12 to 24 inch widths. The design stays sharp at any size because every star is cut from solid color vinyl rather than printed, so there is no ink to fade or peel at the edges.

How the Decal Set Is Built

Every stripe in this set is cut from cast vinyl, the flexible film that conforms to gentle curves, body creases and door handles without lifting at the edges. The red, white and blue layers are separate pieces, so you apply them one color at a time and get crisp lines between the bands with no color bleed. Cast vinyl also resists shrinking in heat, which matters for hoods and roofs parked in the sun all summer. The set ships with application tape holding each stripe in position, plus a squeegee and illustrated instructions so a first-time installer can get a smooth result. Matte, gloss, clear and static cling finishes are available, so you can match the sheen of your paint or run a flat military-style look.

Picking Your Width and Placement

Twelve inches is the starting point and works for mirror caps, rear windows or a narrow accent down a sport compact. Twenty-four inch sets fill most standard hoods on half-ton trucks, while 36 and 48 inch widths cover wide hoods, full tailgates or the complete roof of a crew cab. Measure the flat area you want to cover before ordering, and remember the stripes can be trimmed during installation if you need to stop short of a body line. Popular placements include the hood center, running front bumper to windshield, a full roof-to-tailgate run, or a tailgate-only layout for truck owners who want the flag without touching the doors. The bands can also be split across both front fenders for a staggered look.

Installation and Care

Apply the decals in shade with the surface between roughly 60 and 100 degrees Fahrenheit, clean and free of wax. A spray of soapy water lets you slide each stripe into position before squeegeeing out the moisture, which is the easiest path for long pieces. Work one stripe at a time, overlapping the color bands slightly where they meet so no paint shows through the seam. After application, avoid pressure washing directly at the edges for the first few days. For long-term care, hand wash with mild soap and skip abrasive polishes over the vinyl. When you are ready for a change, warm the stripes with a hair dryer and peel slowly; cast vinyl typically removes cleanly from factory paint, though results vary with age and surface condition.

What you get

• Set of red, white and blue stars and stripes decals cut from solid-color cast vinyl
• Available widths from 12 to 48 inches to fit cars, trucks, hoods, roofs and tailgates
• Separate color layers for crisp band lines with no printed ink to fade
• Choose matte, gloss, clear or static cling finish
• Ships with application tape, squeegee and step-by-step instructions
• Stripes can be trimmed and spaced to match your body lines
• Made to order in the USA

Specifications

Frequently asked questions

Will one set cover my hood and roof?

It depends on the width you choose and your vehicle. A 36 or 48 inch set typically covers a full hood or roof run on a full-size truck, while smaller vehicles may need the 24 inch option. Measure the flat area you want to cover and compare it to the set width before ordering.

Can I install these myself?

Yes. Each stripe ships on application tape with instructions and a squeegee. A wet application with soapy water gives you time to reposition long stripes before you squeegee them down.

Will the colors fade?

The stripes are cut from solid-color cast vinyl rather than printed, so there is no ink layer to fade. Like all vinyl graphics, long-term appearance depends on sun exposure and how the vehicle is washed and stored.