By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A pair of 18 inch racing stripe decals cut from Cast Vinyl, made for drivers who want a motorsport look on their Corolla. Choose the stripe width that fits your build.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
An 18 inch stripe pair sits wide enough to read as a true racing treatment without swallowing the whole hood or trunk. On a compact sedan body, that width fills the center panel with room to spare at the edges, so the stripes look intentional rather than squeezed. Each kit ships as a matched pair, cut at the same time from the same roll, so both sides match in width and color when you install them. If you want a slimmer motorsport line, this same design is available in 4, 8, and 12 inch decal sizes. Many buyers start with the 18 inch pair on the hood and later add a narrower set along the sides for a coordinated look.
Every stripe pair is printed on Cast Vinyl, which conforms to the gentle curves of a hood or trunk lid without fighting you during installation. You pick the finish that matches your car's paint: gloss sits closest to a factory clear coat, matte gives a flat motorsport contrast, clear vinyl carries the printed stripe over your paint color, and static cling goes on without adhesive for a temporary look. The matte and gloss options use adhesive backing rated for outdoor use, so rain and car washes are part of normal life for them. Cling versions are best for short-term display, track days, or testing how the layout looks before committing to adhesive.
Start with a clean, dry, wax-free surface and work in shade so the vinyl stays relaxed. Peel the backing, tack one end of the stripe in place, and squeegee from the center outward, letting the Cast Vinyl stretch over body lines instead of creasing. If a bubble hides from you, a small pinhole lets the air escape without lifting the stripe. The pair can be trimmed at panel gaps with a sharp blade for a clean break at the hood edge. Take your time aligning the first stripe, then match the second to it, since even spacing is what makes a stripe pair read as a deliberate design rather than an afterthought.
This listing covers the 18 inch pair, with the same stripe design also cut in 4, 8, and 12 inch decal sizes for narrower layouts or smaller panels. After installation, avoid pressure washing directly at the stripe edges for the first day while the adhesive sets. Routine hand washing and gentle brushless washes are fine. Avoid waxing over the stripes with paste waxes, since buildup at the edge can lift the vinyl over time. Priced in the same range as comparable stripe kits on the market, this pair ships as a ready-to-apply set with application tape in place, so what arrives is what goes on the car. Order the finish and size that match your build.
The 18 inch pair is cut as a general racing stripe shape, not a panel-specific template. Most installs look best with light trimming at hood or trunk gaps using a sharp blade, which takes only a few minutes.
Clear vinyl uses adhesive and is intended for longer-term display, with the stripe printed on transparent film. Static cling has no adhesive at all and is designed for temporary use, so you can remove and reposition it easily.
For adhesive finishes, wash and remove wax from the application area first so the vinyl bonds properly. Static cling also grips best on a clean, smooth surface.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
