Gloss Racing Stripes for Corolla Hood | Toyota Decals

Description

Gloss vinyl racing stripes cut to dress up your Corolla hood. A clean two-stripe look for daily drivers who want a sportier front end without a full wrap.

A Classic Stripe Look for Your Corolla

Racing stripes have been the fastest way to give a sedan some attitude for decades, and this gloss vinyl set brings that look to your Corolla hood. Each stripe is cut from gloss Cast Vinyl, so the surface catches light the same way painted stripes do, blending in with your factory paint instead of sitting on top of it like a sticker. The set is designed for a centered hood layout, giving the front end a symmetrical, performance-inspired appearance. Whether your car is a commuter that needs a personality boost or the base for a bigger build, these stripes add visual width and motion to the hood in a single afternoon of work. Browse our Toyota racing stripes collection for more layouts, including side stripes and accent pieces that pair with this hood set.

Choose Your Stripe Width

Every car and every taste calls for a different stripe width, so this design is offered in four decal sizes: 4, 8, 12 and 18 inches. Narrow 4-inch stripes sit close together for a subtle, understated accent that reads as a detail rather than a statement. The 8 and 12-inch options are the popular middle ground, filling the hood with a balanced stripe-to-paint ratio that works on most sedan hoods. If you want a bold, race-inspired front end, the 18-inch pair makes the stripes the main event. Measure your hood before ordering, keeping in mind the space between the hood creases and around the washer nozzle area, so you can pick the width that fits your car best.

Gloss Finish That Matches Paint

The gloss finish is the reason this set looks like it belongs on the car. The smooth, shiny surface reflects light in a way that closely matches clear-coated paint, so the stripes appear painted on rather than applied. We cut each stripe from quality Cast Vinyl, which is thin and conformable enough to follow gentle hood contours without lifting at the edges. Application is a standard wet or dry install using the pre-masked pieces: position the stripes, squeegee from the center outward, and peel the transfer tape. Full surface prep with a clean, wax-free hood is the key to a long-lasting result, and the vinyl removes cleanly with heat when you are ready for a change.

Made to Order in Our

Each stripe set is cut to order in our US, so nothing sits in a warehouse losing tack before it reaches you. Your set arrives pre-masked and ready to apply, with backing paper protecting the adhesive face and transfer tape holding the stripe alignment during install. The set includes both left and right stripes so you can dress the full hood in one session. Because the vinyl is cut rather than printed, the gloss surface runs edge to edge with no printed border to fade or peel. If you are planning a full stripe theme, this hood set pairs naturally with roof and trunk stripes from the same collection for a continuous look down the length of the car.

What you get

• Gloss Cast Vinyl stripes with a paint-matching shine
• Available in 4, 8, 12 or 18 inch decal sizes
• Includes left and right stripe for a centered hood layout
• Pre-masked with transfer tape for easier alignment
• Conforms to hood contours and removes with heat
• Cut to order in our US

Specifications

Frequently asked questions

Will these stripes fit my Corolla hood?

The stripes are trimmed to length during install, so they can be sized to your hood. Measure your hood width and the space between body lines, then choose the 4, 8, 12 or 18 inch decal size that best fills that area.

How do I apply the stripes?

Clean the hood thoroughly and remove any wax. Position each pre-masked stripe, squeegee from the center outward to remove air and water, then peel the transfer tape slowly at an angle. A wet install gives you extra time to adjust alignment before the vinyl sets.

Can I remove the stripes later?

Yes. Warm the vinyl with a heat gun or hair dryer on low and peel it away slowly. Any remaining adhesive can be cleaned off with a standard adhesive remover, leaving the paint underneath untouched.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.