Matte Hood Stripes for Toyota Tundra | Vinyl Decal Set

Description

A pair of matte black hood stripes cut from Cast Vinyl, sized and shaped for truck owners who want a clean racing look on their Tundra. Sold as a two-piece decal set with your choice of stripe width.

A Pair of Matte Hood Stripes Built for Truck Owners

This decal set includes two matching hood stripes cut from matte Cast Vinyl, designed for drivers who want the look of toyota racing stripes without the price of a custom paint job. The matte finish reads as a flat, painted-on black rather than a shiny sticker, so the stripes blend into your hood instead of sitting on top of it. Each stripe is cut to order in your choice of 4, 8, 12 or 18 inch width, letting you decide whether you want a subtle accent or a bold, full-width statement. The pair arrives ready to apply with a peel-and-stick backing, and the vinyl conforms to the gentle curves of a truck hood for a smooth, bubble-free laydown when installed with care.

Why Matte Works on a Work Truck

Gloss stripes can fight with a factory paint job, reflecting light differently and drawing attention to the edge of the decal. Matte vinyl solves that problem. On darker paint it creates a deep, shadowed contrast; on lighter paint it reads as a clean two-tone break across the hood. Because the surface is non-High-Visibility, dust, water spots and minor swirls in the finish are far less noticeable than they would be on a gloss decal. The stripes also pair naturally with common truck accessories like matte black badging, bed covers and window trim. If your build leans toward a low-key, blackout aesthetic rather than a show-truck shine, this matte pair is the direction to go.

Choosing Your Stripe Width

The four size options cover a wide range of looks. The 4 inch pair sits close to the center of the hood and works as a slim accent stripe, similar to what you see on classic muscle cars. The 8 inch option is the most popular middle ground, wide enough to read clearly from a distance without overwhelming the hood. The 12 inch pair creates a strong, modern racing presence, and the 18 inch set covers most of the hood surface for a full custom-paint effect. Measure your hood before ordering, keeping in mind that the stated size refers to the width of each individual stripe in the pair. When in doubt, tape a paper template to the hood and step back twenty feet.

Installation and Care

Application works best on a clean, dry hood above roughly 60 degrees Fahrenheit, or in a garage warmed to that temperature. Wash the surface, remove any wax with isopropyl alcohol, and let it dry fully. Peel the backing, position each stripe, and smooth it from the center outward with a felt-edge squeegee or a soft cloth to push air toward the edges. The Cast Vinyl stretches slightly around hood contours, so take your time on curved sections. After application, avoid pressure washing directly at the stripe edges and skip automated brush washes. Hand washing with mild soap keeps the matte finish looking flat and clean for the long haul.

What you get

• Sold as a matching pair of two hood stripe decals
• Matte black Cast Vinyl with a flat, non-High-Visibility finish
• Available in 4, 8, 12 or 18 inch stripe widths
• Peel-and-stick application with pressure-activated adhesive
• Conforms to the gentle curves of a truck hood
• Precision machine-cut edges for a painted-on look
• Trim-to-fit design lets you customize the final length

Specifications

Frequently asked questions

Will these stripes fit my specific hood length?

The stripes ship at a generous length so you can trim them to fit your hood during installation. Measure your hood from the leading edge to the windshield cowl before you apply, and cut to length with a sharp blade for a clean edge.

Can I remove the stripes later without damaging my paint?

Yes. Warm the vinyl with a hair dryer or heat gun on a low setting and peel it back slowly at a shallow angle. Any remaining adhesive can be cleaned off with isopropyl alcohol. Removal is easiest on original, well-adhered factory paint.

What is the difference between the 4 and 18 inch sizes?

The number refers to the width of each individual stripe in the pair. A 4 inch stripe is a slim accent line, while an 18 inch stripe covers most of the hood for a bold racing look. Tape paper templates to your hood to preview each width before ordering.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.