By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
An 18 inch matte vinyl tank decal for riders who want a clean, low-shine look on their fuel tank. Cut from durable Cast Vinyl for smooth application on curved surfaces.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
Glossy graphics can fight with the lines of a fuel tank, especially under direct sun where reflections break up the design. This 18 inch matte tank decal takes the opposite approach. The flat finish absorbs light instead of bouncing it, so the artwork sits visually closer to the paint and reads as something that belongs there. At 18 inches wide, the decal fills the top face of most mid-size and larger tanks without wrapping over the sides, which keeps the layout tidy. Riders who prefer a understated, painted-on appearance over a loud sticker look tend to gravitate toward matte for exactly this reason. The finish also hides minor scuffs and fingerprints far better than gloss.
Fuel tanks are not flat, and thin budget vinyl often wrinkles or lifts the moment it meets a curve. We cut this decal from Cast Vinyl, the conformable grade that stretches and settles into compound contours without fighting back. The matte face is laminated for abrasion resistance, so boots, zippers, and tank bags sliding across the surface do not immediately scuff the print. Application uses a standard wet or dry method with transfer tape, and the material repositions briefly during install so you can dial in placement before it sets. The decal is printed with printed inks intended to hold color through long sun exposure without fading to pastel.
This listing covers the 18 inch version, which suits full-size tanks and riders who want a single bold Graphic across the top. If your tank is smaller or you are building a layered look, the same artwork is available in 4, 8, and 12 inch sizes, so you can pair a large tank piece with smaller matching decals on fairings or panniers. All of our motorcycle decals kits are cut to order in the same matte Cast Vinyl, which means mixed sizes keep a consistent finish across the whole build. Measure the flat area of your tank before ordering, and remember that the listed size refers to the longest dimension of the decal.
Start with a clean tank: wash off wax and polish with isopropyl alcohol and let the surface dry fully. Position the decal with the transfer tape still in place, using low-tack masking tape as a hinge along one edge. Peel the backing away gradually, squeegee from the center outward, and work air toward the edges rather than trapping it under the Graphic. On colder days, warm the surface slightly so the vinyl conforms around tank contours. Wait several hours before riding or wiping the area down. If a small bubble remains, a fine needle at the edge lets you press it out without visible damage.
It depends on the flat area of your tank. Measure the width of the top face where you want the Graphic placed. Eighteen inches suits most full-size tanks, but smaller tanks may look better with the 8 or 12 inch version of the same design.
Yes. Warm the decal gently with a hair dryer and peel it back slowly at a low angle. Any remaining adhesive can be cleaned off with isopropyl alcohol. Original factory paint in good condition is typically unaffected.
Yes, and that is a popular combination. The flat decal contrasts with glossy paint, giving the Graphic a painted-on look rather than a shiny sticker appearance.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
