By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A racing stripe decal set for motorcycle helmets, cut from durable vinyl in your choice of matte, gloss, clear or static cling. Sold in 4, 8, 12 or 18 inch decal sizes to fit most half, full-face and modular helmets.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This racing stripe decal set is designed for riders who want a clean, custom stripe layout without painting their helmet. Each kit includes a coordinated set of stripe pieces you arrange across the shell, so you can build a center stripe, side accents or a full wrap depending on your style. The stripes are cut from vinyl with a pressure-sensitive adhesive that holds to smooth helmet surfaces, including gloss paint and clear coat. Because the set is sold by decal size, you can pick the scale that matches your helmet, from a subtle accent on a half helmet to bold coverage on a full-face shell. It is a simple afternoon project with a big visual payoff.
Our motorcycle decals kits are organized by size so you get a set that actually fits your gear. The 4 inch option suits small accent stripes or helmets with limited flat space, while the 8 inch set works well for standard half and open-face shells. The 12 and 18 inch sets give you longer stripe runs for full-face and modular helmets with room to trim around vents. Each kit ships as a pre-cut set with transfer film, ready to position and apply. No cutting from a sheet, no guesswork on layout, just peel, place and squeegee down. Pick your finish and size, and the kit is made to order for your ride.
Every stripe set is printed on cast or calendered vinyl in one of four finishes. Matte gives a low-sheen, painted-on look that blends into flat finishes. Gloss adds shine that pairs well with polished shells. Clear vinyl is great for stripe outlines or layered builds over existing graphics. Static cling uses no adhesive at all, so it peels off cleanly, ideal for leased gear, track-day loaner helmets or anyone who likes to change their look often. All finishes are suitable for indoor and outdoor use on helmet surfaces. If you switch between bikes or gear, static cling lets you reposition the stripes without leaving residue behind.
Start with a clean, dry helmet at room temperature. Wipe the application area with isopropyl alcohol and let it fully dry. Plan your layout first, holding each stripe in place with low-tack masking tape before committing. Peel the backing, use the transfer film to carry the stripe over, and press from the center outward with a squeegee or firm card. Work slowly around curves and vents, warming the vinyl slightly with a hair dryer helps it conform to the shell. Once the stripe is down, peel the transfer film back on itself at a low angle. Avoid heavy abrasion or pressure on the edges and skip applying over fresh paint that has not fully cured.
The set is sold by decal size, so choose based on your helmet type. The 4 and 8 inch sets work for half and open-face helmets, while the 12 and 18 inch sets fit full-face and modular shells with room to trim around vents. Measure the flat area you want to cover before ordering.
Adhesive vinyl uses a pressure-sensitive adhesive for a long-term hold and conforms to curved shells. Static cling has no adhesive, so it removes and repositions cleanly, which suits track-day gear or helmets you change up often.
Yes, the vinyl applies over clean, smooth existing graphics or paint. Clean the surface with isopropyl alcohol first and let it dry fully. Avoid applying over textured or heavily damaged areas, as edges may lift.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
