By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A large branch wall decal that turns a blank living room wall into a focal point. Cut from matte vinyl in your choice of width from 12 to 48 inches, it applies peel-and-stick without tools or paste.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This oversized branch decal was designed for the wall that needs something more than a framed print. The sprawling silhouette reads like a hand-painted mural, but it goes up in minutes with no brushes, no drips, and no drywall repair afterward. Choose a width from 12 inches for a subtle accent above a console table up to 48 inches for a full statement behind a sofa or bed. The bare-branch shape pairs well with neutral palettes, gallery walls, and reading corners, and it works in spaces where a real plant would never survive. It is a simple way to add height, movement, and an organic line to a room that feels flat.
Application is a peel-and-stick process that most people finish in a single sitting. Start with a clean, dry, smooth wall, free of dust and freshly applied paint that has not fully cured. Position the branch pieces, peel the backing, and press from the center outward to push out air as you go. The set arrives on a backing sheet with transfer film, so the thin twigs stay aligned exactly as designed instead of floating loose. If a piece lands slightly off, you can carefully lift and reposition it during application. Because the branch is cut into sections, you can follow the included guide layout or spread the pieces to fit your own wall.
The decal is printed and cut on matte cast vinyl, chosen because it does not catch room light the way a glossy sticker would. On a painted wall, the branch reads as if it were stenciled or painted directly onto the surface, which is the look most people want from wall decals in living spaces. The thin, flexible material follows smooth interior surfaces without lifting at the edges. When your style changes, the decal removes cleanly from standard painted drywall without scraping or heat guns. Keep in mind that fresh paint should cure fully before application, and textured surfaces like heavy orange peel will not hold fine twig detail well.
Each order includes the complete branch set in the width you select: 12, 18, 24, 32, 40, or 48 inches. Wider sets include proportionally longer branches and more twig detail, so the design stays balanced at every size rather than simply being stretched. Measure your wall before ordering and leave a few inches of margin on each side so the branch does not crowd adjacent furniture or trim. The decal ships flat in protective packaging to keep the twigs from creasing in transit. One set covers one focal wall; many customers order two to create a mirrored canopy across a wider space, which works especially well behind sectionals and headboards.
On standard painted drywall that has fully cured, the decal removes cleanly without scraping. Avoid applying it to fresh paint, textured walls, or delicate surfaces, and peel slowly at a low angle when removing.
Measure the wall space you want the branch to span, then subtract a few inches on each side for margin. A 24 to 32 inch set suits an accent above furniture, while 40 to 48 inches works as a full focal piece behind a sofa or bed.
Yes. The branch arrives in sections with a suggested layout, but you can spread or tighten the pieces to fit your wall, as long as you apply each piece once and avoid repeated repositioning after it is pressed down.
12", 18", 24", 36", 48"
Your shopping cart is empty
Notifications
