By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A personalized name decal cut from cast vinyl for your baby's nursery wall. Choose your width from 12 to 48 inches and pick a matte, gloss, or clear finish to match your room.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
Your baby's name deserves more than a store-bought print in a frame. This custom name decal is cut to order from cast vinyl and applied directly to the wall, so it sits flush with the paint like it was painted on by hand. Send us the exact spelling and we cut it fresh for your order, nothing pre-made, nothing pulled from a shelf. Parents use it above the crib, over the changing table, or centered on the main nursery wall. Because it is made to your width choice, you can size it to fit a narrow nook or stretch it across a wide accent wall. It is a simple way to make a rental or starter nursery feel finished and personal.
Every order starts with the name and ends with your choices. Pick a width from 12, 18, 24, 30, 36, 42, or 48 inches, and the height scales with the lettering so the proportions stay balanced. Then choose the finish that fits your room: matte for a soft, painted-on look that hides glare, gloss for a subtle sheen that catches lamplight, or clear for a frosted-glass effect on painted walls. The decal arrives as a pre-spaced set on a single backing sheet, so you apply the whole name in one placement instead of lining up letters one at a time. Transfer tape keeps every letter aligned exactly as it was cut.
Application takes a few minutes and needs no tools beyond a squeegee or an old credit card. Wipe the wall clean and let it dry fully, then hold the decal up with painter's tape to find your position. Peel the backing away, press the decal onto the wall working from the center outward, and rub firmly over the transfer tape. Slowly peel the tape back at a low angle and the letters stay behind. Matte and gloss finishes read solid and bold on any wall color. The clear finish works best on smooth, lighter walls where the letters read as a subtle tone-on-tone effect. Full step-by-step instructions ship with every order.
This decal makes a thoughtful baby shower or new-arrival gift because it is made for one specific child. Order it with the baby's name and chosen width, and it arrives ready to apply in a protective mailer that keeps the vinyl flat. Grandparents, godparents, and friends often gift it alongside a nursery theme or color scheme the parents have already picked. If you are not sure of the size, a mid-range width like 24 or 30 inches fits most nursery walls comfortably. It is a small, personal piece of decor that turns a plain wall into the room's focal point without nails, hooks, or holes.
Measure the wall space where the name will go, then choose a width that leaves comfortable margin on both sides. A 24 or 30 inch width fits most standard nursery walls, while 36 to 48 inch widths work well above a crib or on a wide accent wall.
The decal is designed for interior walls and removes best when peeled slowly at a low angle. Freshly painted walls should cure for about 30 days before application. We cannot guarantee results on every paint and wall condition, so test in an inconspicuous spot if you are concerned.
It adheres best to smooth surfaces like painted drywall, glass, or finished wood. Heavily textured walls may not hold the fine letter details, so a smoother surface will give the cleanest result.
12", 18", 24", 36", 48"
Your shopping cart is empty
Notifications
