By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
An ATV-inspired fender decal cut from durable vinyl, sized for compact sport sedans like the Civic. A simple way to give your daily driver a rugged Off-Road look.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This fender decal borrows its angled, rally-inspired shape from all-terrain vehicle graphics and shrinks it down for street cars. The design wraps over the fender line with layered panels that read as aggressive tread and trail styling, giving a stock commuter a purposeful, trail-ready attitude without any bodywork. It is cut to order in your choice of 4, 8, 12 or 18 inch sizes, so you can run a subtle accent on one panel or a full-width statement across both front fenders. If you are building out a honda graphics kit theme across your car, this piece pairs well with matching hood and quarter panel decals from the same collection.
Every decal is printed on professional-grade cast or calendered vinyl in your choice of matte, gloss, clear or static cling finish. Matte gives the flat, low-profile look popular on Off-Road builds, while gloss adds depth and shine that stands out against factory paint. Clear vinyl lets the underlying body color show through the Graphic itself, and static cling offers a non-permanent option for renters, lease drivers or anyone who likes to change their look. The vinyl is die-cut with clean edges so the layered panels line up the way they were designed to, and it is printed with inks intended to hold their color through normal outdoor exposure.
Application works best on a clean, dry, wax-free surface above roughly 60 degrees Fahrenheit. Wash the fender with dish soap and water, dry it fully, then wipe the application area down with isopropyl alcohol to remove any residue. Peel the backing, position the decal using the top edge as your guide, and press from the center outward with a squeegee or credit card to push air toward the edges. Warm the vinyl slightly with a hair dryer on curved sections so it conforms to the body line, then remove the transfer tape slowly at a flat angle. Full adhesion typically develops after about 48 hours, so avoid pressure washing the area during that window.
The 4 inch size works as a small accent near the mirror or door handle, and the 8 inch size suits a single fender vent area or rear quarter panel. The 12 inch option covers most of a front fender on a compact sedan, while the 18 inch size is the full statement piece, spanning from behind the front wheel arch up toward the hood line. Measure the flat area you want to cover before ordering, keeping in mind that body creases and door handles interrupt the surface. Each decal is sold individually, so order two if you want a matched pair across both sides of the car.
When removed correctly, the vinyl should come off cleanly from factory paint. Warm it with a hair dryer and peel slowly at a shallow angle, then roll away any adhesive residue with your fingers. Avoid removing cold vinyl in freezing weather.
For compact sedans, the 12 inch size covers most of a front fender, while the 18 inch size extends from the wheel arch toward the hood line. Measure your flat panel space first, since creases and trim interrupt the surface.
Yes. This design is offered in matte, gloss, clear and static cling. Static cling is the best choice if you want a removable, non-adhesive option, while matte gives the flat Off-Road look and gloss adds shine.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
