By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A pair of gray dolphin decals cut from marine-grade cast vinyl, made for boat owners who want clean ocean graphics on their hull. Available in widths from 12 to 48 inches.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
There is something about a dolphin on a boat that just fits. This gray dolphin set gives your hull a classic marine look without shouting for attention. Each set includes two dolphins in a swimming pose, cut from cast vinyl with a smooth matte finish that reads like painted artwork rather than plastic. The gray tone sits comfortably against white, cream, navy or any gelcoat color you already have. Whether you run a center console, a pontoon or a cabin cruiser, these boat decals add personality in minutes. Choose the width that matches your space, from a modest 12 inches for transoms and console doors up to 48 inches for a full-length hull accent.
Salt spray, sun and wet weekends are part of the deal, so these graphics are cut from cast vinyl made to hold up in marine conditions. The matte surface cuts down glare on bright days, so the dolphins stay easy on the eyes when the sun is low on the water. A gloss finish option is available if you prefer a wet-look shine that matches polished gelcoat. Cast vinyl conforms to the gentle curves of a hull without fighting you during application, and it lays flat without lifting at the edges. Apply it to fiberglass, painted aluminum or glass, and it stays put through rinse-downs, dock days and long afternoons at anchor.
You do not need a shop or a professional installer to get these dolphins on the water. Every set ships with application tape already in place and a squeegee-style edge, so you peel, position and press. Clean the hull with isopropyl alcohol, let it dry, and apply above the waterline on a calm day between roughly 60 and 90 degrees Fahrenheit for the easiest install. The vinyl can be repositioned lightly during placement before you squeegee it down firmly. Work from the center outward to push out air, and trim nothing because each dolphin is contour cut to shape. Full instructions ship with every set, and removal later leaves minimal residue.
One size does not fit every hull, so this set comes in a range of widths: 12, 18, 24, 30, 36 and 48 inches, measured across the widest dolphin in the pair. The two dolphins are spaced to work as a single scene, but you can split them and place one on each side of the boat for a mirrored look. Smaller widths suit transoms, bait station doors and cooler lids, while the larger sizes anchor a hull stripe or flank a boat name. If you are pairing these with lettering, leave a few inches of breathing room so the dolphins read as art, not clutter. Every set is cut to order in our shop.
They are intended for use above the waterline. Constant submersion, antifouling paint and marine growth will shorten the life of any vinyl graphic, so we recommend placing them on the hull sides, transom or console where they stay dry between runs.
Measure the flat area where you want the dolphins, and pick a width that leaves at least a couple of inches of margin on each end. The 12 to 24 inch sizes work well on transoms and consoles, while 30 to 48 inch widths suit hull sides and larger vessels.
The gray is a neutral mid-tone that pairs with most hull colors and lettering. If exact color matching matters to you, order a smaller size first or contact us before purchasing so you can see the tone in person.
12", 18", 24", 36", 48"
There are no reviews yet.
You must be logged in to post a review.
Your shopping cart is empty
Notifications