By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A confined space warning sign decal kit printed on durable Cast Vinyl, made for crews marking tanks, manholes, vaults and access points. Available in 4, 8, 12 or 18 inch decal sizes.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
Confined spaces hide in plain sight on job sites, plants and utility routes: storage tanks, pits, silos, crawlspaces and maintenance shafts. This decal kit gives you a coordinated set of warning graphics so every entry point carries the same clear message. Each decal is printed on Cast Vinyl with a matte or gloss finish that resists fading from routine sun exposure and wipes clean after dust and grime build up. Choose 4 inch decals for tight pipes and valve stems, 8 inch for doors and hatches, or 12 and 18 inch sizes for fences, walls and gate posts where visibility from a distance matters. One kit, one consistent warning, applied wherever your crew works.
Pick the finish that fits the surface. Matte decals cut down glare under overhead lighting and work well on painted walls, control panels and indoor signage boards. Gloss decals add contrast and shine on metal doors, equipment housings and exterior posts. Static cling and clear finishes are ideal for glass, polished surfaces or places where you want the warning visible without a solid background. All options are printed with printed inks on Cast Vinyl that conforms to gentle curves and flat panels alike. Surfaces should be clean, dry and free of grease before application. Apply above 50 degrees Fahrenheit for the best adhesion, and press from the center outward to push out air.
Safety labeling only works when it stays put and stays readable. Our Space Stickers are cut with a small border so the warning reads clearly even from an angle, and the vinyl holds up to rain, wash-downs and general jobsite wear. Because the kit ships with matching graphics in your chosen size, you can label a whole facility or route without mixing designs from different sources. The decals remove cleanly with heat from a hair dryer when signage needs updating, leaving minimal residue to wipe away. Whether you maintain municipal infrastructure, industrial equipment or private property, this kit keeps your hazard communication consistent from one entry point to the next.
Decal sizes run 4, 8, 12 and 18 inches, measured at the longest edge of the Graphic. For legibility, OSHA-style guidance generally recommends larger signage for areas seen from vehicles or across a yard, so the 12 and 18 inch options suit gates, tank exteriors and perimeter fencing. The 4 and 8 inch sizes fit toolboxes, ladders, hatch lids and confined-space entry logs. Order the size that matches your most common surface, or mix sizes across multiple kits for full-site coverage. Each kit arrives ready to apply with a backing liner and transfer film, packed flat in a rigid mailer so the decals arrive without creases. Made in our US and shipped promptly after printing.
Yes. The Cast Vinyl and printed inks are designed for outdoor exposure on posts, fences, tanks and equipment. For glass or polished surfaces, static cling or clear finishes are good choices.
Use 4 or 8 inch decals for close-up surfaces like hatches, ladders and toolboxes. Choose 12 or 18 inch decals for fences, walls and gate posts where the warning needs to be readable from a distance.
Warm the decal with a hair dryer and peel slowly from one corner. Any remaining adhesive can be cleaned off with a mild solvent or adhesive remover. Static cling versions peel off with no residue.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
