Gloss Camaro Racing Stripes Pair Vinyl Decal Set

Description

A pair of gloss vinyl racing stripe decals cut to your choice of 4, 8, 12 or 18 inch lengths, made for Camaro owners who want classic stripe styling without paint.

Classic Camaro Racing Stripes in a Gloss Cast Vinyl Pair

This decal set brings the look of painted racing stripes to your Camaro at a fraction of the cost and commitment. Each order includes two matching stripe decals, so you can run a dual-stripe layout down the hood, roof or trunk. The gloss finish catches light the way a clear-coated paint job does, giving the stripes a wet, polished appearance against factory paint. We cut each pair from Cast Vinyl, which conforms to the gentle curves of body panels better than thicker films. Whether you drive a weekend cruiser or a track-day build, these camaro racing stripes give the car a finished, performance-inspired look you can apply in an afternoon and remove cleanly when you are ready for a change.

Four Stripe Lengths to Match Your Layout

Every car and every build is different, so this set is sold by decal length rather than as one fixed size. Choose 4 inch stripes for accents on fenders, mirrors or door handles, 8 inch for short hood or quarter-panel sections, 12 inch for a mid-length run, or 18 inch when you want a longer stretch of striping. Because you receive a pair, you can keep the two stripes equal in length for a symmetrical dual-stripe layout, or trim them during installation for a staggered custom look. Measure the panel area you plan to cover before ordering so the pair fits your intended placement without needing extra trimming.

Gloss Finish That Reads Like Paint

The gloss surface on these stripes is the closest a decal gets to a painted pinstripe job. Light rolls across the vinyl the same way it rolls across clear coat, so the stripes blend into the surrounding paint instead of sitting on top of it like a flat sticker. The finish also resists fingerprints and smudging during handling, which makes installation more forgiving. If your Camaro has a matte or flat paint package, the gloss pair creates a deliberate contrast that many owners like; on gloss paint, the match is nearly seamless. The vinyl is thin enough to wrap slightly over panel edges while holding its shape across the flat center of a hood or roof.

Applying Your Stripe Pair at Home

Installation is a dry, tape-and-squeegee process you can do in a driveway. Clean the panel with isopropyl alcohol and let it dry completely. Position each stripe with the premask application tape still in place, checking spacing and alignment from several feet back before committing. Once aligned, press from the center outward with a felt-edge squeegee to lock the vinyl down, then peel the tape slowly at a low angle. Work in moderate temperatures and out of direct sun so the vinyl stays relaxed. Small bubbles can be lifted with a pin and smoothed flat. Keep the car dry for the first day while the adhesive fully bonds, and hand wash around the stripes afterward.

What you get

• Sold as a matching pair of two stripe decals
• Available in 4, 8, 12 or 18 inch decal lengths
• Gloss Cast Vinyl with a paint-like shine
• Conforms to curved body panels and panel edges
• Premask application tape and dry-install process
• Removable without repainting when you want a change
• Cut to order in our US

Specifications

Frequently asked questions

Do these stripes fit every Camaro year and model?

The set is sold by decal length, not by body style, so fitment depends on where you place them. Measure the panel area you want to cover and choose the 4, 8, 12 or 18 inch length that matches. The vinyl can be trimmed during installation for custom spacing.

Can I run the pair down the full hood and roof?

These decals are cut to the listed lengths, so a full hood-to-trunk run usually requires multiple sets placed end to end. For a single panel or partial accent, one pair is typically enough. Measure first to decide how many sets your layout needs.

Will the gloss finish match my gloss paint?

Gloss vinyl reflects light similarly to clear-coated paint, so on gloss finishes the blend is very close. On matte or flat paint, the gloss pair creates a contrasting accent, which some owners choose deliberately.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.