By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A pair of racing stripe vinyl decals cut for mid-engine sports car owners who want a custom stripe look without paint. Available in 4, 8, 12 or 18 inch sizes.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This decal pair brings the classic dual racing stripe treatment to a modern mid-engine sports car body. Each set includes two matching stripe decals designed to work together as a left-and-right pair, giving your hood, roof or rear deck a symmetrical motorsport-inspired accent. Instead of paying a body for painted stripes, you get a clean vinyl alternative you can apply in your driveway with basic tools. Choose the stripe length that fits your build, from a subtle 4 inch accent to a full 18 inch statement. Like our wider range of camper decals and vehicle graphics, each pair is cut to order, so the stripes you receive are fresh vinyl, not stock that has sat on a shelf losing tack.
Every stripe pair is printed in your choice of four finishes. Matte gives a low-sheen, almost painted-on look that blends with flat exterior trim. Gloss delivers the high-shine finish most people picture when they think of factory racing stripes. Clear stripes work as a protective ghost layer over existing paint or wrap edges, letting your car's color show through. Static cling offers a fully temporary option that holds without adhesive, ideal for track days, car shows or weekend styling you can peel off Monday morning. All finishes are printed on quality cast or calendered vinyl using fade-resistant inks, so the stripe color stays true through sun, washes and regular driving.
Application works best on a clean, dry surface above roughly 60 degrees Fahrenheit. Wash the area, remove any wax with isopropyl alcohol, and let the paint dry fully before starting. Position each stripe with masking tape as a hinge, check your alignment against body lines, then peel the backing and squeegee from the center outward to push out air. The 4 and 8 inch sizes are easy for first-timers; the 12 and 18 inch stripes go on smoothly with a second set of hands. Wet application with a slip solution is fine for larger sizes. Wait about 24 to 48 hours before washing so the adhesive sets. Full instructions ship with every pair.
We cut and print every order in-house in the USA rather than reselling pre-cut imports, which means consistent edges, accurate sizing and fresh material on every pair. If you are matching these stripes to other camper decals or graphics on your vehicle, we can print the same finish and color family so the whole setup reads as one design. Ordering is simple: pick your size, pick your finish, and your pair ships with transfer tape applied and ready to position. Questions about fit on a specific body panel or which finish suits your paint? Message us before ordering and we will help you choose the right option for your build.
The pair is cut in standard decal sizes of 4, 8, 12 or 18 inches, so you choose the length that suits the panel you are covering. They are not pre-cut to a specific factory panel shape, which gives you flexibility on placement across the hood, roof or deck.
Yes. Warm the vinyl with a hair dryer or heat gun on low and peel slowly at a shallow angle. Any remaining adhesive wipes away with isopropyl alcohol. The static cling version removes with no adhesive at all.
Gloss is the closest match to a painted stripe look on a clear-coated car. Matte reads flat and understated, clear works as a subtle protective layer, and static cling is best for temporary display use.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
