Blade Streak Truck Decals, Vinyl Racing Stripe Set

Description

A set of blade streak vinyl decals cut to run along the sides of your car or truck. Choose from 12 to 48 inch widths to match your build.

Blade Streak Truck Decals That Fit Your Build

These blade streak decals are cut from cast vinyl and designed to follow the body lines of cars, pickups, and SUVs. Each set includes matching pieces for both sides of the vehicle so the streaks line up at the same height and angle. Because we cut each set to your chosen width, you can go subtle with a 12 inch pair or make a bold statement with a 48 inch set. The tapered blade shape works well on hood sides, door panels, and rocker areas, giving a clean performance look without any permanent changes to your paint.

Choose Your Width and Finish

Every set is available in widths from 12 to 48 inches, measured at the widest point of the blade. Pick the size that best matches the space you have between your trim lines and wheel arches. You can also choose the finish that suits your vehicle: matte for a low-key, painted-on look, gloss for a bright accent that pops against flat paint, clear for a subtle tone-on-tone effect, or static cling if you want a temporary option you can reposition or remove anytime. Static cling is a good choice for leased vehicles or anyone who likes to change their look by season.

Easy Application with Clean Results

Each decal arrives weeded and masked, ready to apply with the transfer tape included in the set. Start with a clean, dry surface and apply on a mild day for the easiest installation. The vinyl conforms to gentle curves and body contours, and the matte and gloss options can be smoothed out with a squeegee or soft edge if you catch an air bubble. Full application instructions come with every order. If you make a placement mistake with the static cling version, simply peel it back and try again without leaving residue behind.

Care and Removal

Wash around your decals by hand or at a touch-free wash, and avoid direct high-pressure spray on the edges. When you are ready for a change, warm the decal gently with a hair dryer on low and peel it away slowly at an angle. Cast vinyl removes cleanly from well-maintained paint in most cases. Static cling pieces lift off with no tools at all. Keeping the streaks out of direct prolonged sunlight when parked will help the colors stay looking sharp for as long as you keep them on the vehicle.

Where Blade Streak Decals Work Best

These vinyl racing stripe decals are made for truck hoods, roofs, tailgates, and bedside panels, giving your build a clean streak of personality without a full paint job. The stripe set works well on smooth, flat surfaces where the vinyl can lay down evenly, so doors and quarter panels are also good candidates. Because the adhesive bonds to painted metal, glass, and some smooth plastic trim, you can run a single accent stripe or a full set depending on the look you want. Static cling versions are a smart pick for leased vehicles or anyone who wants a temporary change, since they hold firm at highway speeds yet peel away without residue. Before applying, wash the surface and let it dry fully so the vinyl grips properly and edges stay sealed.

A Stripe Set Built to Handle the Road

Daily driving puts decals through a lot: sun, rain, road grime, and car washes. Blade Streak decals use durable vinyl designed to resist fading and hold their edge through regular washes, whether you choose a matte finish for a low-key look, gloss for shine, clear for a subtle layer, or static cling for flexibility. Matte hides minor swirls and dust better, while gloss catches light and deepens the color of your paint underneath. With basic care, hand washing and avoiding high-pressure sprays directly on the stripe edges, the set stays put season after season. When you are ready for a change, warm the vinyl gently with a hair dryer and peel slowly from one corner, working across the stripe to keep the surface clean and ready for whatever comes next.

What you get

• Set includes matching decals for both sides of your vehicle
• Available in 12, 24, 36, and 48 inch widths
• Cut from cast vinyl for flexibility and clean removal
• Four finish options: matte, gloss, clear, and static cling
• Arrives pre-weeded with transfer tape and instructions
• Tapered blade shape complements hood sides, doors, and rockers
• Static cling option is repositionable and residue-free

Specifications

Frequently asked questions

How do I pick the right width for my vehicle?

Measure the flat area between your trim lines or wheel arches where you plan to place the streaks, then choose the width that fits within that space. If you are between sizes, going one size down leaves room to adjust placement during application.

Will these decals damage my paint?

When applied to clean, well-maintained paint and removed with gentle heat, cast vinyl typically comes off without damage. Avoid applying over fresh or flaking paint. The static cling option uses no adhesive at all, so it is the safest choice if you are concerned about your finish.

Can I put these on my windows instead of the body?

Yes. The decals adhere to smooth glass, so you can run a streak along a side window or rear glass. Static cling works especially well on windows since it holds without adhesive and can be moved or removed at any time.