By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A patriotic flame stripe decal set for boat hulls, pairing an American flag theme with sweeping flame graphics. Choose a width from 12 to 48 inches to fit your boat's sides.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This flame decals set brings together two looks boaters love: the stars and stripes and flowing flame stripes that trace the waterline. Each set is printed on cast vinyl in a matte or gloss finish, with a clear option for buyers who want the graphics to sit over existing gelcoat patterns without hiding them. The red, white, and blue stripes taper into flame tips, so the design reads well whether your boat is docked or running at speed. Pick the width that matches your hull, apply one set per side, and the layout mirrors itself for a balanced look. It is a straightforward way to give a fishing boat, pontoon, or runabout a patriotic refresh without a wrap.
Widths run from 12 inches up to 48 inches, measured at the widest point of the flame stripe layout. Smaller widths suit jon boats, small skiffs, and personal watercraft, while the larger sizes fill the sides of bass boats, pontoons, and center consoles. Before ordering, measure the flat area of your hull where the graphic will sit and compare it to the set dimensions listed for each option. Matte finish cuts glare and works well on boats with flat paint or textured surfaces. Gloss finish adds depth under sunlight. Clear and static cling options are also available if you want a subtler look or a temporary display for holidays and regattas.
Application works best on a clean, dry, wax-free surface above the waterline. Wash the hull, remove any wax with a prep solvent, and let it dry fully before starting. Warm the vinyl slightly with a heat gun or hair dryer to help it conform to curves near the bow, and use a squeegee from the center outward to push out air. The set comes as separate pieces for each side, so you can position and adjust before committing. Full instructions ship with every order. If you are applying near a trailer bunk or lift, allow the graphic to set before the boat sits against padding. Static cling versions apply without adhesive and peel off cleanly.
Once applied, the vinyl holds up to routine boat life: trailering, washing, and weekend time on the water. Rinse with fresh water after saltwater outings, and avoid high-pressure spray directly at the edges of the graphic. When washing by hand, use a soft cloth and mild soap rather than abrasive cleaners or stiff brushes. If you store the boat for winter, a cover keeps the graphics out of prolonged sun and ice. Should a corner ever lift, warm it gently and press it back down with a squeegee. For static cling sets, peel them off before storage, keep the backing film, and reapply them next season on a clean surface.
Measure the flat area of your hull where you want the flames to run, at the widest point of the planned layout. Compare that measurement to the width options from 12 to 48 inches and choose the closest size that fits within the flat area.
No. Apply them above the waterline on a clean, dry, wax-free surface. Constant submersion is not the intended use for this vinyl.
Static cling is best for docked displays, regattas, and seasonal use. For trailering and regular time on the water, the adhesive vinyl options are the better choice.
12", 18", 24", 36", 48"
There are no reviews yet.
You must be logged in to post a review.
Your shopping cart is empty
Notifications