American Flag Decal Set of 2, Waving Stripes for Trucks

Description

A set of two waving American flag vinyl decals sized for semi trucks, trailers, and pickups. Choose widths from 12 to 48 inches for doors, sleeper cabs, or toolboxes.

Waving Flag Decals Built for Semi Trucks and Trailers

This american flag decal set is cut in a flowing wave pattern that reads as a flag in motion, a look long associated with over-the-road rigs. Each set includes two matching decals, so you can dress both doors of a day cab, balance a sleeper cab, or run one on each side of a trailer. The stripes and field are cut from separate pieces of cast vinyl, which keeps the wave shape crisp at large sizes. With widths from 12 to 48 inches, the same set works on a pickup door, a dump truck body, or a full-size semi, and the pair keeps the layout symmetrical no matter which width you pick.

Choosing Your Width from 12 to 48 Inches

Size is the biggest decision with a flag pair, so measure before ordering. A 12-inch width suits pickup doors and toolboxes; 18 to 24 inches fits medium-duty trucks and van sides; 30 to 36 inches is a common choice for semi sleeper panels; and 48 inches fills a trailer side or long hood. Because the flag is wider than it is tall, a 36-inch decal stands roughly two-thirds that height. Apply both decals at the same height and forward edge so the pair lines up when the truck is viewed head-on. If you are layering the flag next to lettering or DOT numbers, leave a few inches of clearance around the stripe tips.

Matte, Gloss, and Clear Finish Options

Every set is printed on cast vinyl in your choice of finish. Matte is the popular pick for painted cabs and trailer sides because it blends with factory paint instead of catching glare, which helps the reds read deep at highway angles. Gloss adds shine that stands out against flat or weathered surfaces. Clear finish keeps the focus on the stripe shapes themselves with a nearly invisible carrier. Static cling is also available if you want a flag you can reposition seasonally or move between trucks. All four options use the same cut wave pattern, so the look stays consistent whichever finish you choose.

Applying Your Flag Decal Pair

Clean the surface with isopropyl alcohol and let it dry completely before positioning. On a warm, dry day the vinyl lays down easiest; a felt-edge squeegee or credit card smooths the decal from the center outward to push air toward the edges. The wave tips are the most delicate spots, so work them last with light pressure. For large widths, have a second person hold the decal level while you tack the top edge before committing to full contact. Once applied, avoid pressure washing directly at the stripe edges for the first day. Both decals in the set ship with application tape and backing, ready to position and install.

What you get

• Set of 2 matching waving American flag decals
• Available in widths from 12 to 48 inches
• Cut from cast vinyl for conforming to curved cab panels
• Choose matte, gloss, clear, or static cling finish
• Wave stripe design suited to semi trucks, trailers, and pickups
• Ships with application tape and backing paper
• Made to order in the USA by LEO Sticker

Specifications

Frequently asked questions

Do both decals face the same direction?

Yes. Both decals in the set are cut identically so the pair mirrors side to side and the flag reads the same from either side of the truck.

Can I put these on a trailer instead of a cab?

Yes. The cast vinyl conforms to flat and gently curved metal, so trailer sides, dump bodies, and toolbox doors all work. Choose a larger width for long trailer panels.

What if I need to remove the decals later?

Warm the vinyl with a hair dryer or heat gun on low and peel slowly from one corner. Any remaining adhesive can be cleaned with isopropyl alcohol.