By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A pair of matte, gloss, clear or static cling racing stripe decals cut to sit along the hood of your Tacoma. Made for truck owners who want a motorsport look without a full wrap.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This decal pair brings classic motorsport styling to your truck in a single afternoon. Each set includes two mirrored stripe decals designed to run along the hood line, giving your Tacoma a symmetrical, race-ready look. Choose the stripe width that fits your build, from a slim 4 inch accent to a bold 18 inch statement. We print on cast or calendered vinyl in your choice of matte, gloss, clear or static cling, so you can match the finish to your paint or layer it for a custom effect. Every set is cut to order in our and ships with application tape ready to position and install.
Not every build calls for the same stripe width. A 4 inch pair keeps things subtle and works well on trucks with factory lines you want to echo. The 8 inch option is our most popular middle ground, wide enough to read as racing stripes without overwhelming the hood. Step up to 12 inch stripes for a stronger visual block, or go with the full 18 inch pair when you want the hood to carry the whole design. Because both stripes in the set are cut at the same width, you get a clean, even layout from cowl to leading edge with no measuring guesswork between sides.
Matte stripes sit flat against glossy factory paint and give a modern, understated contrast. Gloss stripes read like painted-on striping and blend smoothly with most clearcoat finishes. Clear vinyl works as a protective layer over existing graphics or creates a subtle tone-on-tone effect on lighter trucks. Static cling is the choice if you want the look for a season, a show, or a lease vehicle, since it peels off without adhesive residue. All four options are printed and cut in-house, and each set arrives weeded, masked and ready to apply with a wet or dry installation.
Start with a clean, dry hood, ideally installed in shade when the surface is cool to the touch. Position each stripe with the application tape still in place, using the hood's center crease or Graphic as a reference to keep the pair even. Once you are happy with placement, tape one edge as a hinge, peel the backing, and squeegee from the center outward to push out air. Work slowly on the curves near the cowl so the vinyl follows the panel instead of tenting. Full illustrated instructions ship with every set, and a small squeegee can be added at checkout for a smoother install.
The stripes are trimmed as a universal hood-length pair, so you position and trim them to your specific hood during install. They are not pre-cut to a specific model year, which gives you flexibility to set the exact length and spacing you want.
The 8 inch pair is the most common choice for a classic racing stripe look. Choose 4 inch for a subtle accent, 12 inch for a bolder block of color, or 18 inch if you want the stripes to dominate the hood.
Yes. Static cling peels off by hand with no residue, which is ideal for temporary use. Adhesive vinyl removes by peeling at an angle with gentle heat from a hair dryer on a warm day, then cleaning the surface with isopropyl alcohol.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
