Ram Truck Window Decal - Gloss Vinyl Sticker 4-18 Inch

Description

A gloss Vinyl Decal cut for Ram and Dodge Ram 3500 owners who want a bold window statement. Available in 4, 8, 12 or 18 inch sizes to fit truck glass, toolboxes and body panels.

A Gloss Ram Truck Window Sticker Built for Real Truck Glass

This gloss Vinyl Decal is designed for Ram and Dodge Ram 3500 owners who want their truck to stand out at the job site, the trailhead or the parking lot. The gloss finish catches daylight the same way your paint does, so the artwork reads clean against tinted or clear glass. Each decal is cut from Cast Vinyl with a smooth, shiny surface that holds crisp edges on curves and lettering. Whether you run a crew cab with wide rear glass or a single cab with a smaller window, the size range lets you scale the look to your truck. Apply one as a rear window centerpiece or pair it with smaller decals on side glass for a matched set.

Pick Your Size: 4, 8, 12 or 18 Inch Decal Options

Every truck window is different, so this decal comes in four sizes. The 4 inch works well on corner glass, mirrors and toolbox lids where you want a subtle mark. The 8 and 12 inch sizes sit comfortably on side windows or the lower corner of a rear windshield. The 18 inch fills the center of most full-size truck rear glass and reads clearly from a distance, which is why many buyers treat it as their go-to social sticker for car photos and truck meetups. Measure your glass before ordering, keeping a little clearance around defroster lines and wiper paths, so the decal lays flat with room to spare.

How to Apply Your Gloss Vinyl Decal

Application takes a few minutes with basic tools. Clean the glass with isopropyl alcohol and let it dry completely so no dust or wax sits under the vinyl. Peel the backing, position the decal using the transfer tape, and press from the center outward with a squeegee or credit card to push air toward the edges. Work on a mild day if you can, since vinyl conforms best when the glass is not ice cold. Once the decal is down, go over it firmly, then peel the transfer tape slowly at a low angle. Wait a day before washing the truck, and avoid direct pressure washing on the decal edge.

Why Ram 3500 Owners Choose LEO Sticker

We cut every decal to order in our US on Cast Vinyl, so you get a fresh decal rather than stock that has sat in a warehouse losing tack. The gloss finish is printed and cut with tight registration, which keeps fine lines and small lettering sharp instead of ragged. We pack each decal with a paper backing and transfer tape, ready to apply, and we ship it in a rigid mailer so it arrives flat instead of creased. Our team is available for questions about sizing or placement before you order, and we stand behind getting your decal to you in apply-ready condition.

What you get

• Gloss Cast Vinyl Decal with a smooth, shiny finish
• Four size options: 4, 8, 12 or 18 inches
• Cut to order in our US
• Ships with transfer tape for easy one-piece application
• Works on windows, toolboxes and smooth body panels
• Packed in a rigid mailer so it arrives flat
• Sized for Ram and Dodge Ram 3500 trucks

Specifications

Frequently asked questions

Will this decal work on tinted windows?

Yes. The gloss finish reads well on both tinted and clear glass. On dark tint, lighter decal colors tend to show up best, so consider your window tint when choosing.

Which size should I choose for my rear window?

Measure the flat area of your rear glass first, avoiding defroster lines and wiper paths if you want clearance. Most full-size truck rear windows fit the 12 or 18 inch decal, while side glass usually suits the 4 or 8 inch sizes.

Can I remove the decal later?

Yes. Warm the decal gently with a hair dryer and peel it away slowly at a low angle. Any remaining adhesive can be cleaned off with isopropyl alcohol.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.