By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A single large-format custom brand label printed on vinyl, made for businesses that need one bold decal with their own artwork. Available in 4, 8, 12 or 18 inch sizes.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
When your logo needs real presence, an 18 inch custom brand label delivers it. This is a single decal cut to your artwork, printed at full size so your mark reads clearly from across a room or a parking lot. Upload your own design and we print it on Cast Vinyl with your choice of matte, gloss, clear or static cling finish. The 18 inch size works well for storefront glass, trade show displays, vehicle panels, toolboxes and equipment cases where a smaller label gets lost. If you only need one decal rather than a bulk roll, this listing is built for exactly that: one label, your artwork, printed to order. Smaller 4, 8 and 12 inch versions of the same artwork are also available in this custom labels stickers collection.
Matte is the quiet choice. It cuts glare, blends into painted surfaces and keeps attention on your artwork rather than the sticker itself. Gloss adds shine and punch, which helps logos with bold color stand out on smooth surfaces. Clear vinyl prints your design on a transparent background, so the label looks like it was printed directly on the surface behind it, a popular option for glass doors and windows. Static cling holds with no adhesive at all, peeling off clean when you want a temporary label for a seasonal promotion or a rented space. All four finishes print with the same artwork file, so you can order one now and switch finishes later without redesigning anything.
The process is simple. Select your size, choose your finish, and upload your artwork at checkout. Vector files such as AI, EPS, SVG or PDF give the sharpest results at 18 inches, but a high-resolution PNG or JPG can work too. If your file has a background you do not want printed, include that in your design notes and we will review it before printing. We check every file for obvious issues like low resolution or cut lines in the wrong place, and we contact you if something needs fixing. One decal ships flat or rolled depending on size, ready to apply. If you are unsure whether your artwork will hold up at 18 inches, send it over and ask before ordering.
Big decals go on best with two people and a little patience. Clean the surface with isopropyl alcohol and let it dry completely. Lay the decal face down and peel the backing away slowly, holding the vinyl taut. Start from one edge and squeegee outward, working air toward the open side rather than trapping it under the middle. On an 18 inch label, work in sections and check your alignment against a level line before committing to the full surface. Once applied, run the squeegee over the whole decal again with firm, overlapping passes, then peel the transfer tape back on itself at a sharp angle. Wait a day before washing or exposing the area to heavy moisture.
Yes. This listing is for one custom decal printed with your own artwork. Upload your logo file at checkout and we print it at the size you select.
Vector files like AI, EPS, SVG or PDF give the sharpest print at 18 inches. A high-resolution PNG or JPG can also work. If you are unsure, send the file before ordering and we will take a look.
Static cling works best on very smooth, non-porous surfaces like glass and glossy painted metal. For textured walls or rough surfaces, choose an adhesive matte or gloss finish instead.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
