By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
Riptide Stripes truck side decals bring a flowing, wave-inspired stripe graphic to your pickup or work truck. Sold as a set in your choice of 12-inch to 48-inch widths.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
The Riptide Stripes graphic gives your truck's doors and bed panels a sense of motion even when you're parked. The design sweeps across the side of the cab in a series of tapering stripes that rise and fall like water, creating a custom racing stripes look without the straight-laced feel of a classic dual stripe. Each set is cut to order in your chosen width, so you can run a subtle 12-inch accent behind the front wheel or stretch a full 48-inch graphic across the door and into the bed. The stripes work on single-cab, extended-cab, and crew-cab trucks alike, and they look just as at home on a daily driver as on a show build.
Every Riptide Stripes set is available in widths from 12 to 48 inches, measured at the widest point of the graphic. Pick the size that matches your truck's proportions: narrower sets sit cleanly behind the front fender, while wider sets fill the door and quarter panel for a bolder statement. You can also choose the finish that suits your build. Matte gives the stripes a low-key, painted-on look that blends with flat or matte paint. Gloss adds depth and shine that stands out against flat paint. Clear and static cling options let you layer the stripe design over existing graphics or apply it temporarily for events and photo shoots.
We print and cut each set on cast vinyl, a thin, conformable material that follows the gentle curves of truck body panels. The vinyl is printed in your choice of our stocked matte or gloss finishes, so you can match the look you want. Application is a wet or dry process using the premask layer included with your set: peel, position, squeegee, and peel away the carrier. The stripes are die-cut with no background, so only the stripe shapes remain on your paint, and the edges are cut clean for a crisp line. With basic care, the graphic stays in place through daily driving and washing.
Ordering is simple: select your width, choose your finish, and check out. Each set includes both driver and passenger side graphics, cut as mirror images so the design flows continuously across both sides of the truck. Before you install, clean the panels with isopropyl alcohol and let them dry completely. On cooler days, warm the surface slightly so the vinyl conforms around body lines. Full step-by-step instructions ship with every order, and our support team is available by email if you hit a snag during installation. If you're not sure which width looks best on your truck, send us a photo and we'll help you choose.
The Riptide Stripes graphic is a universal design, not a model-specific kit. Because the set comes in widths from 12 to 48 inches, most buyers find a size that works on their cab and door configuration. If you're between two sizes, the smaller option is usually the safer fit.
Yes. Warm the vinyl with a hair dryer or heat gun on low and peel it away slowly from one edge. Any remaining adhesive can be cleaned off with isopropyl alcohol. Static cling versions remove with no adhesive at all.
The cast vinyl conforms to gentle curves and body lines. For door gaps, most installers apply the stripe in sections or trim carefully at the gap with a hobby knife so each door's graphic moves independently.
12", 18", 24", 36", 48"
There are no reviews yet.
You must be logged in to post a review.
Your shopping cart is empty
Notifications
