4Runner Side Body Stripes Decal Set | Toy Racing Stripes

Description

A pair of Cast Vinyl side body stripes for SUV owners who want a clean racing-stripe look along the doors. Choose from four decal sizes to match your build.

Side Stripes That Follow Your SUV's Lines

This decal set is cut to run along the lower body line of a five-door SUV, giving the doors and quarter panels a sporty two-tone break without paint. Each kit includes a matched left and right stripe so both sides of the vehicle mirror each other, which matters when you are dressing up a daily driver you see every day. The stripes are cut from Cast Vinyl, so they conform to body contours and panel gaps instead of fighting them. Whether you run your rig stock or lifted, the set installs with basic tools and a free afternoon. Pick the stripe height that fits your look, apply, squeegee, and peel the carrier film for a crisp edge.

Choose Your Stripe Height: 4, 8, 12 or 18 Inches

One size does not fit every build, so this set comes in four decal heights. A 4-inch stripe reads as a subtle accent line, something you notice at the door handle and nowhere else. The 8-inch option splits the difference and is the popular middle ground for daily drivers. A 12-inch stripe starts to carry real visual weight and pairs well with darker paint or larger wheels. The 18-inch cut makes a bold statement and works on trucks with lifted stance or flat lower panels. All four sizes use the same cut pattern, just scaled, so the shape stays consistent. Measure the flat area between your wheel arches before ordering to confirm which height lands where you want it.

Toy Racing Stripes in Four Finishes

Every stripe is printed to order in your choice of matte, gloss, clear, or static cling finish. Matte gives a painted-on look that hides fingerprints and reads well on flat or Low-Gloss paint. Gloss adds depth and shine, the classic stripe treatment. Clear stripes work as a protective layer over existing color or as a subtle texture on glass-smooth paint. Static cling is the no-commitment option: it holds to the panel without adhesive and peels off clean when you want a change, which makes it a smart pick for lease vehicles or seasonal looks. All finishes are printed with fade-resistant inks on cast or calendered vinyl depending on the finish you select.

How to Install Your Side Body Stripes

Installation is a wet-apply process you can finish in a driveway. Wash the panels thoroughly and remove any wax with isopropyl alcohol. Lay each stripe in position with masking tape to check alignment against the body line, then hinge the tape and peel the backing. Spray the panel and the adhesive with slip solution, float the stripe into place, and squeegee from the center outward to push out liquid and air. Warm the vinyl slightly around door handles and panel curves so it stretches instead of creasing. Peel the carrier film slowly at a low angle. Keep the stripes dry for the first day, and avoid pressure washing directly at the edges afterward.

What you get

• Matched left and right stripe pair for a symmetrical look
• Available in 4, 8, 12 or 18 inch decal heights
• Cast Vinyl that conforms to body lines and panel contours
• Four finish options: matte, gloss, clear, and static cling
• Printed to order in our US shop with long-lasting inks on durable vinyl
• Wet-apply installation with hinged alignment for DIY placement
• Static cling version removes clean with no adhesive residue

Specifications

Frequently asked questions

Do these stripes fit my exact model year?

The stripe pattern is cut as a universal side body design, so it is not model-year specific. Measure the flat area between your wheel arches and compare it to the 4, 8, 12 or 18 inch heights to confirm fit before ordering.

Which finish should I choose?

Gloss is the classic shiny stripe look, matte gives a painted-on appearance, clear works as a subtle overlay, and static cling peels off without adhesive for a temporary look or leased vehicles.

Can I remove the stripes later?

Yes. Warm the vinyl with a hair dryer or heat gun on low and peel it back slowly at a shallow angle. Remove any remaining adhesive with isopropyl alcohol. Static cling removes with no residue at all.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.