Feedback Racing Stripes Decal Set | Custom Racing Stripes

Description

A pair of feedback-style custom racing stripes cut from cast vinyl, sized to fit cars, trucks and semis. Choose your width from 12 to 48 inches for a clean, tailored look on any cab or hood.

Feedback Stripes for Cars, Trucks and Semis

This two-piece stripe set brings a classic feedback-style layout to your vehicle, with a wide center stripe flanked by a narrower companion stripe on each panel. Each decal is cut to order in your choice of width, from 12 inches up to 48 inches, so the same design works on a compact car hood, a pickup tailgate or a semi cab. The set ships as a matched left and right pair, giving your build a balanced, finished appearance whether you are dressing up a daily driver or a working rig. Because the stripes are cut rather than printed, the color runs through the vinyl for a crisp edge with no visible background film between the stripe elements.

Custom Racing Stripes Cut to Your Width

Ordering custom racing stripes should not mean guessing at fit. Select your width at checkout and we cut both panels to that dimension, so the pair stays proportional no matter which size you choose. Narrower widths suit car hoods, roof lines and rear panels, while the larger sizes are popular for truck beds, trailer sides and semi cab fairings. If you are working with a long hood or an extended panel, the extra width gives the stripes more presence without changing the design itself. Measure the area you want to cover before ordering, and remember that the pair can be trimmed during installation if you need to fine-tune the fit around trim, mirrors or body lines.

Matte, Gloss and Clear Finish Options

Choose the surface that matches your build. Matte cast vinyl gives the stripes a low-sheen, painted-on look that blends well with flat or matte paint. Gloss vinyl delivers the traditional high-shine stripe appearance most people picture on a muscle car or show truck. Clear vinyl offers a subtle protective layer look for buyers who want the stripe layout without added color. All three finishes are outdoor-grade cast vinyl, cut fresh for each order. Cast vinyl conforms to gentle curves and body contours better than thicker films, which makes it a good match for hoods, fenders and cab corners where the surface is not perfectly flat.

Installing Your Two-Piece Stripe Set

Start with a clean, dry surface free of wax and grease, ideally installed above 60 degrees Fahrenheit. Position each stripe with masking tape as a hinge, peel the backing a section at a time, and squeegee from the center outward to push air toward the edges. The application tape keeps both stripe elements aligned as one piece, so spacing stays even across the pair. Take your time on curved areas and let the vinyl stretch gently rather than forcing it. Once the stripes are down, remove the transfer tape slowly at a shallow angle. Wait a few days before washing, and avoid pressure washing directly at the stripe edges so the vinyl stays seated through daily driving and weather.

What you get

• Set of 2 matched stripe panels for a balanced left-right layout
• Width options from 12 to 48 inches to fit cars, trucks and semis
• Available in matte, gloss and clear cast vinyl finishes
• Cut-to-order design with color through the vinyl for crisp edges
• Cast vinyl conforms to gentle body curves and contours
• Includes application tape for aligned, straightforward installation
• Trim-friendly during install for fit around trim and body lines

Specifications

Frequently asked questions

What width should I choose for my vehicle?

Measure the panel you want to cover, such as the hood or cab, and pick the closest width that fits within that space. Smaller widths work well on cars, while 36 to 48 inch sizes are common for trucks and semis. You can also trim the stripes during installation for a precise fit.

Do the stripes come as one piece or two?

This is a set of two decals, one for each side of the vehicle. Each panel includes the full feedback stripe layout held together by application tape, so the spacing between stripe elements stays even when you install it.

Will these stripes damage my paint?

The vinyl is designed for removable use on painted surfaces in normal conditions. Install on a clean, wax-free surface and remove slowly by peeling at a shallow angle, ideally warm, to help the paint underneath stay intact.