Bald Eagle American Flag Decals, Set of 2 for Trucks and Semis

Description

A two-piece bald eagle and American flag vinyl decal set made for semi tractors, pickup trucks and trailers. Printed on cast vinyl in your choice of matte, gloss, clear or static cling finish, with widths from 12 to 48 inches.

Eagle and Flag Decals Built for Semi Truck Doors and Trailers

This set pairs a bold bald eagle graphic with a waving American flag design, sized to work on the sleeper doors, rear doors or drop-downs of a semi tractor, as well as pickup tailgates and toolbox lids. Each order includes two matching decals, so you can dress both sides of the truck or run one on the tractor and one on the trailer. Choose a width from 12 to 48 inches depending on where you plan to place them. The artwork is printed as a single piece, so the eagle, flag and lettering arrive together with no layering or alignment work on your end. It is a straightforward way for owner-operators and company drivers to put a patriotic american flag decal on the rig without piecing together multiple graphics.

Choose Your Finish and Size

Every set is available in matte, gloss, clear or static cling. Matte cuts glare under highway lighting and looks painted-on at a distance, while gloss gives the artwork a sharper, higher-contrast look in daylight. Clear finish lets the artwork sit on glass or painted surfaces with the background showing through, and static cling applies without adhesive, which suits drivers who want a seasonal or lease-friendly option. Width options run from 12 inches for cab corners and mirrors up to 48 inches for trailer doors and toolboxes. When measuring, allow a little margin around your target area so the decal sits flat across panel gaps and rivet lines rather than bridging them.

Cast Vinyl Printing and Application

We print each decal on cast vinyl, which conforms to curved panels, rivets and corrugations better than flat calendered stock. Application is a wet or dry install using the premask carrier film included on the decal: position the graphic, squeegee from the center outward, and peel the carrier away. Full surface prep instructions ship with every set, and the basics are simple, a clean, wax-free surface above roughly 50 degrees Fahrenheit. Static cling versions skip the adhesive entirely and press onto smooth glass or glossy paint, then peel off when you want to move or remove them. Tools needed are nothing more than a squeegee or credit card and a spray bottle if you prefer a wet install.

A Patriotic American Flag Decal Made in the USA

The artwork is drawn and printed in our US shop, and every order is cut and packed the same way whether it is a 12-inch pair for a pickup or a 48-inch set for a fleet of semis. Because these are printed rather than cut from solid color stock, the shading in the eagle's feathers and the folds in the flag come through with detail that layered decals struggle to match. Fleets running multiple trucks can order matching sets and keep a consistent look across the lineup. If you are shopping for a driver, the two-piece format and size range make this a practical gift, since it fits everything from a mirror arm to a full trailer door.

What you get

• Set of 2 matching bald eagle and American flag decals
• Available in 12, 16, 20, 24, 30, 36 and 48 inch widths
• Printed on cast vinyl that conforms to curves and rivet lines
• Choice of matte, gloss, clear or static cling finish
• Single-piece printed artwork, no layering or alignment required
• Premask carrier film included for wet or dry application
• Designed, printed and packed in our US shop

Specifications

Frequently asked questions

Will one set cover both doors of my semi?

Yes. Each order includes two matching decals, so you can place one on each sleeper door, or split them between the tractor and trailer. For full-size trailer doors, the 36 or 48 inch widths give the most coverage.

Which finish should I pick for a truck that gets washed often?

Matte and gloss are the most common choices for truck exteriors, since both use adhesive-backed cast vinyl that holds up through brush and pressure washing. Static cling is best reserved for glass or very smooth surfaces where you want easy removal.

Can these go over rivets and corrugated trailer panels?

Cast vinyl is the right stock for that, since it stretches and conforms where calendered vinyl tends to tent or lift. For heavily riveted panels, we recommend the wet install method and working the decal into the recesses with a squeegee as you go.