Matte Vinyl Decal Kit for Model Y | LEO Sticker

Description

A matte-finish vinyl graphics kit cut for Tesla Model Y owners who want a clean, understated accent on their doors, hood or tailgate. Choose from four decal sizes to match your build.

Why a Matte Finish Works on a Model Y

The Model Y has smooth, understated body panels, and a matte decal sits flat against that surface without pulling attention away from the lines of the car. Unlike gloss, which can read as a bright add-on, matte blends into the paint so the Graphic looks like part of the design rather than something stuck on top. It also hides fingerprints, water spots and light swirl marks far better than a shiny finish, which matters on a daily driver that lives outside. Our matte vinyl is cut from calendered vinyl with a low-sheen face, so it holds a consistent look in sun, shade and garage lighting. If your Model Y wears factory matte paint or paint protection film, this is the finish that matches it most closely.

Sizing: Pick the Right Decal Size for Your Panel

Every kit is offered in four decal sizes: 4, 8, 12 or 18 inches, measured at the longest point of the Graphic. The 4-inch size works as a subtle fender or mirror-cap accent. The 8-inch size fits nicely on front doors or above the charge port. The 12-inch size suits rear quarter panels or the tailgate area below the Graphic line. The 18-inch size is the statement option, sized for hoods, front doors or the liftgate. Because the Graphic scales with the size you choose, smaller versions keep the same proportions as the large ones. If you are placing decals on both sides of the car, ordering the same size for each keeps the layout symmetrical.

How These Tesla Decals Apply and Come Off

Application is a dry install with transfer tape, the same method used on vinyl wraps. Clean the panel with isopropyl alcohol, let it dry, then position the decal using the tape as a carrier. A felt-edge squeegee or a soft card smooths it down from the center outward, and the carrier peels away leaving the Graphic on the paint. The vinyl is conformable enough to follow the gentle curves of the doors and liftgate without heat in most conditions. When you want a change, warm the decal slightly and peel it back slowly; it removes without tearing into pieces. Any residue left behind cleans up with adhesive remover on a microfiber cloth.

Kit Contents and Ordering Tips

Each kit includes the decal set, transfer tape applied and ready to position, and a printed instruction card with step-by-step placement guidance. Order one kit for a single accent, or two kits if you plan to mirror the Graphic on both sides of the vehicle. Before applying, park in shade and work when panel temperature is moderate, since extreme heat or cold makes vinyl harder to position accurately. Take a few minutes to test-fit each decal with masking tape before committing, especially around door handles, body creases and the tailgate seam. Measure your target panel first and compare it to the 4, 8, 12 or 18 inch options so the Graphic fills the space the way you picture it.

What you get

• Matte calendered vinyl with a low-sheen finish that blends with paint
• Four decal sizes: 4, 8, 12 or 18 inches at the longest point
• Cut to suit Tesla Model Y doors, fenders, hood and liftgate
• Dry application with pre-applied transfer tape and instruction card
• Removable by warming and peeling, with no tearing into fragments
• Conforms to gentle body-panel curves without heat in most conditions
• Made to order in our US

Specifications

Frequently asked questions

Will the matte decal match my car's matte paint?

Matte vinyl has a low-sheen finish that sits close to most factory matte paint and matte paint protection film in overall look. Exact color and texture matching cannot be designed, so we suggest starting with a smaller size if you want to test the appearance on your vehicle first.

Do these decals damage the paint when removed?

When removed correctly, the vinyl peels away in one piece. Warm the decal gently with a hair dryer or by parking in sun, pull it back slowly at a low angle, and clean any residue with adhesive remover. Avoid pulling cold vinyl aggressively.

Which size should I choose for the tailgate?

The 12-inch size is a common fit below the Graphic line on the liftgate, while the 18-inch size fills more of the panel for a bolder look. Measure the flat area you want to cover and compare it to the decal dimensions before ordering.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.