Retro Stripe Side Decals for Ford Bronco | Vinyl Kit

Description

A retro racing-stripe side decal kit cut from Cast Vinyl, made for Ford Bronco owners who want a vintage two-tone look without paint. Choose 4, 8, 12 or 18 inch stripe heights.

Vintage Racing Stripes, Modern Cast Vinyl

This side decal kit brings the classic 1970s rally look to your Bronco with clean, angled stripe graphics that run along the doors and rear quarter panels. Each stripe is cut from Cast Vinyl that conforms to body contours, so the edges lay flat instead of lifting at curves. The retro layout pairs well with two-tone paint, hardtops and factory wheels, and works as a standalone upgrade if you want visual interest without a full wrap. Choose a matte finish for a period-correct painted look, gloss for a fresh clear-coat shine, or clear and static cling options if you want something subtle or temporary. Every kit ships ready to apply with alignment guidance for both two-door and four-door body styles.

Bronco Decals Sized to Fit Your Build

The kit is offered in four stripe heights so you can match the look to your rig. A 4 inch set sits low and understated along the rocker line. The 8 inch height is the most popular middle ground, filling the door panel without crowding the body lines. At 12 inches, the stripes make a bolder statement across the doors and rear quarters. The 18 inch option gives you the full heritage racing look, reaching from the fender arch toward the taillight area. Because these are cut decals rather than printed graphics, the stripe edges stay crisp with no background film to trim around. Measure your door panel height before ordering to confirm which size suits your body style and trim package.

Application You Can Do in Your Driveway

These decals install with a dry or wet application using the premasked transfer film included in the kit. Start with a clean, wax-free surface and a mild day above about 60 degrees Fahrenheit. Peel the backing, position the stripe set using the door seams as reference points, and squeegee from the center outward to push out air. The Cast Vinyl stretches slightly around body curves, which helps it follow the Bronco's door contours without wrinkling. If a bubble remains, a small pinhole lets the air escape without visible damage. Static cling versions press on with no adhesive at all and peel off clean whenever you want to change the look or run a stock appearance for an event.

Care, Removal and Reordering

Once applied, the adhesive-backed finishes hold up to routine washes; avoid high-pressure spray directly at the stripe edges and skip abrasive brushes at automatic car washes. Matte finishes should not be waxed, while gloss finishes accept light polish and spray wax. When you are ready for a change, warm the vinyl gently with a hair dryer on low and peel it back at a shallow angle; any remaining adhesive residue comes off with a citrus-based cleaner and a microfiber towel. If you are building a matching theme, this stripe kit coordinates with other graphics in our bronco decals collection, including hood stripes and rear window sets, so you can extend the retro look around the whole vehicle.

What you get

• Retro angled racing-stripe layout cut for Ford Bronco doors and rear quarters
• Available in 4, 8, 12 or 18 inch stripe heights
• Cast Vinyl that conforms to body curves and door contours
• Choose matte, gloss, clear or static cling finish
• Premasked transfer film included for straightforward alignment
• Fits two-door and four-door body styles
• Not affiliated with or endorsed by the manufacturer.

Specifications

Frequently asked questions

Do these stripes fit both two-door and four-door Broncos?

Yes. The kit includes stripe sets for both sides of the vehicle, and the layout works on two-door and four-door body styles. Use the door and body seams as alignment references during application.

Which stripe height should I choose?

It depends on the look you want. The 4 and 8 inch heights sit along the rocker line for a subtle accent, while 12 and 18 inch heights give a bolder heritage racing look across the doors. Measuring your door panel height before ordering helps you confirm the best fit.

Can I remove the decals later without damaging the paint?

Yes. Warm the vinyl gently with a hair dryer on low heat and peel it back at a shallow angle. Clean any remaining adhesive residue with a citrus-based cleaner and a soft microfiber towel. Static cling finishes remove with no adhesive at all.